Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

How Water Softener Salt Works

Short answer

Water softener salt works by making brine that recharges the softener's resin. Hard water flows through resin beads that trap calcium and magnesium, and when the resin is full, brine flushes through it and swaps those minerals off the beads. The rinse then clears the used brine, and the resin softens water again.

  1. Salt dissolves into brine

    Salt sits in the brine tank, and water in the tank dissolves it into brine. The tank holds the salt until the softener needs it for regeneration. The Tier1 system has a 13.5 by 32 inch salt tank, and the Aquasure system has a metered control head that sets auto-flush intervals based on water use.

  2. Brine recharges the resin

    During regeneration, brine flows through the resin tank and over the resin beads. The resin holds calcium and magnesium from hard water, and the brine swaps sodium onto the beads in their place. The Tier1 system holds 1 cubic foot of NSF/ANSI 44 certified cation resin.

  3. The rinse clears the tank

    After the brine passes through, rinse water flushes the resin tank and carries the calcium, magnesium and used brine away. The resin is then ready to soften water again, and the control head tracks use until the next regeneration. The Aquasure head lets you set auto-flush intervals, and the Tier1 system starts regeneration only when it is required.

  4. Metered heads run it on demand

    A metered control head measures water use and starts regeneration only when the resin needs it. The Aquasure Harmony Series and the Tier1 system both use metered control, and the Superior Filters system is a metered model. Follow the schedule in the maker's manual for your model.

  5. Check the salt level

    Look in the brine tank to see how much salt is left, and add salt when the level drops. Follow the maker's manual for the salt it takes and how high to fill the tank. A tank that runs out of salt cannot make brine, so the resin cannot recharge at the next regeneration.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

What does the salt do in a water softener?

It makes the brine that recharges the resin. The resin traps calcium and magnesium from hard water, and the brine swaps those minerals off the beads so the resin can soften again.

What is grain capacity?

It is the amount of hardness a softener removes before it must regenerate. The Aquasure, Tier1 and Superior Filters systems are rated at 32,000 grains, and the H&G Lifestyles system is rated at 24,000 grains.

How often does a softener regenerate?

It depends on the system and on water use. Metered heads on the Aquasure and Tier1 systems start regeneration based on demand, so follow the schedule in the maker's manual for your model.

Do I need to add salt to the softener?

Yes. Salt in the brine tank is used to make brine for regeneration, so check the level and add salt as the maker's manual says.

More water softeners how-tos