How-to · Water Softeners
What a Water Softener Does
A water softener system removes calcium and magnesium from tap water as the water passes through a tank of resin beads. The beads trade those hard minerals for other ions through ion exchange, so the water that leaves the tank forms less scale on heaters, dishwashers, washing machines and plumbing fixtures. A control head watches water use and starts a regeneration cycle to rinse the resin and restore it.
How hard water shows up
Hard water carries dissolved calcium and magnesium. When that water runs through heaters, dishwashers, washing machines and plumbing fixtures, the minerals leave scale behind. Scale builds up inside appliances and on fixtures, and it can shorten how long they last. A softener removes those minerals before the water reaches them, so less scale forms.
How ion exchange works
Inside the mineral tank, water flows through resin beads that hold ions ready to swap. As hard water passes over the beads, calcium and magnesium stick to the resin and the beads release their stored ions into the water. The water that leaves the tank carries far less hardness. The resin holds a set amount of hardness, rated in grains, before it needs regeneration.
The parts of a system
A whole-house system has three main parts. The mineral tank holds the resin where softening happens. The brine tank holds salt water used to rinse the resin. The control head sits on top of the mineral tank and runs the cycle, and on some models a digital display lets you set flush intervals and watch water use. A bypass valve lets water flow around the system when it is not in use.
What regeneration means
Once the resin has taken up its rated amount of hardness, it cannot soften more water until it is rinsed. During regeneration, the control head draws brine from the salt tank through the resin to wash the collected calcium and magnesium away. Metered controls start this cycle based on how much water the home has used, rather than on a fixed clock. After the rinse, the resin is ready to soften again.
How to read grain capacity
Grain capacity states how much hardness the resin can hold before regeneration, and it is the figure to compare between systems. Three of the systems listed here are rated at 32,000 grains, and one is rated at 24,000 grains. The H&G Lifestyles system is also rated for 700,000 gallons.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
It is rated at 32,000 grains, its digital metered control head lets you set auto-flush intervals, and it carries a 5-year manufacturer warranty.
View on Amazon -
Tier1 32,000 Grain Water Softener System
It is rated at 32,000 grains with 1 cubic foot of resin and a ceramic valve, and metered regeneration starts a cycle when use calls for it.
View on Amazon -
Superior Filters Whole House Water Softener System
It is rated at 32,000 grains, and its resin uses ion exchange to remove calcium and magnesium and hold back scale.
View on Amazon -
H&G Lifestyles Whole House Water Softener
It is rated at 24,000 grains and 700,000 gallons, and its resin removes 99.3% of calcium and 99.5% of magnesium.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
Does a water softener remove calcium and magnesium from tap water?
Yes. The resin in the mineral tank takes up calcium and magnesium through ion exchange as water passes through. The water that leaves the tank carries less of those minerals, so less scale forms on heaters, dishwashers, washing machines and plumbing fixtures.
What happens during regeneration?
The control head draws brine from the salt tank through the resin to wash away the calcium and magnesium the resin collected. Metered controls start the cycle based on how much water the home has used. After the rinse, the resin can soften water again.
What does grain capacity mean?
It states how much hardness the resin can hold before it needs regeneration. A 32,000-grain system holds more hardness between cycles than a 24,000-grain system.




