Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

Water Softener Size: How to Choose

Short answer

Water softener size is the grain capacity, the amount of hardness a unit removes before it regenerates. A larger grain figure suits harder water and higher water use, while a smaller figure suits a smaller home. Match the grain capacity to your water hardness and your water use, then check the space the unit needs.

  1. What grain capacity measures

    Grain capacity is the hardness a softener removes between regenerations, measured in grains. A 32,000 grain unit holds more hardness than a 24,000 grain unit before it needs to regenerate. Check the grain figure, since it sets how often the unit cycles.

  2. Match capacity to your water

    Hard water and high water use call for a larger grain figure, while soft water and low use call for a smaller one. Read the grain capacity on the unit and match it to your water hardness and how much water your home uses. Frequent regeneration wastes salt and water, and a unit that is too small runs out of soft water between cycles.

  3. Count bathrooms as a guide

    Makers state a bathroom count on the unit, and it works as a rough guide to size. The Aquasure Harmony Series is rated for 1-2 bathrooms, while the Tier1 system is rated for 3-4 bathroom homes. Check the bathroom count against your home, and use it with the grain capacity, not in place of it.

  4. Check the space it needs

    Measure the spot where the unit goes before you buy, since tanks and salt tanks take floor space. The Tier1 system has a 9 inch by 53 inch mineral tank and a 13.5 inch by 32 inch salt tank, so it suits a basement, garage or utility room. Leave room around the unit for the brine tank and the bypass valve, and follow the maker's installation manual for the hookup.

  5. Check regeneration and the controls

    A metered control head tracks your water use and starts regeneration only when the resin is spent, which cuts salt and water use. The Aquasure Harmony Series and the Tier1 system each have a metered control head. Check the control head on the unit you pick, and read the manual for the settings it offers.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

What grain capacity do I need?

Match the grain capacity to your water hardness and water use, and use the bathroom count as a guide. A larger grain figure suits harder water and higher use, while a smaller one suits a smaller home.

How often does a softener regenerate?

It depends on the grain capacity and how much water your home uses. A metered control head starts regeneration only when the resin is spent, so the unit cycles when it needs to, not on a fixed schedule.

Can a water softener fit a small space?

Check the tank sizes before you buy. The Tier1 system has a 9 inch by 53 inch mineral tank and a 13.5 inch by 32 inch salt tank, so it needs a basement, garage or utility room. Measure the spot and leave room for the brine tank and the bypass valve.

Do I need a plumber to install one?

Follow the maker's installation manual. It tells you how the unit connects to the main water line, and it says where to hire a licensed plumber. Do not run new plumbing or change the main line yourself.

More water softeners how-tos