How-to · Water Softeners
How to Clean a Water Softener
To clean a water softener, unplug it, set the bypass valve, empty and wash the brine tank, clean the resin with the maker's own cleanser, then refill the salt and run a regeneration cycle. Use only water, mild dish soap, white vinegar or the maker's own cleaner, and only if the manual allows it. Watch for hard water or scale on fixtures.
Unplug the softener and set the bypass
Unplug the softener before you clean it. Set the bypass valve so the house still gets water while the softener is out of service. Read the maker's manual for where the bypass sits on your model and how it moves. Keep the plug dry while you work.
Empty and wash the brine tank
Scoop out the salt that is left and set it aside. Lift out the brine tank if the manual allows it, and wash the inside with water and mild dish soap or white vinegar, if the manual allows it. Rinse the tank and let it dry fully before it goes back in. Do not mix cleaners, and do not use bleach.
Clean the resin with the maker's cleanser
Use the maker's own cleanser as the manual directs. Tier1 pairs its system with a water softener cleanser every 3 months. After the cleanser goes in, follow the manual: the Tier1 metered control initiates regeneration only when required. Do not mix cleaners, and do not use bleach.
Refill the salt and run a regeneration cycle
Fill the brine tank with the salt type the maker's manual calls for, to the level the manual shows. Set the control head back to service and let the metered control initiate regeneration only when required. Check the fittings for drips while the cycle runs, and read the display when it ends. Follow the schedule in the maker's manual for the next cleaning.
Check the settings and watch for signs
After the cycle ends, check the control head settings against the maker's manual. Watch for signs that the softener needs cleaning again, such as hard water, scale on fixtures or a brine tank that smells. Clean again when you see those signs, and follow the schedule in the maker's manual.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
Its programmable digital metered control head sets auto-flush intervals, and its 32,000-grain tank holds prefilled resin.
View on Amazon -
Tier1 32,000 Grain Water Softener System
Its metered regeneration control tracks household demand, and the maker pairs it with a water softener cleanser every 3 months.
View on Amazon -
Superior Filters Whole House Water Softener System
Its 32,000-grain resin is 7% cross-link, and a funnel is recommended for filling the tank.
View on Amazon -
H&G Lifestyles Whole House Water Softener
Its 24,000-grain resin regenerates for continued use, and its NSF certified food grade resin comes with 1 inch PVC piping and 2 control valves.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
Can I use vinegar to clean my water softener?
Yes, if the manual allows it. White vinegar is one of the cleaners for this job, along with water, mild dish soap and the maker's own cleaner. Do not mix cleaners, and do not use bleach.
How often should I clean my water softener?
Follow the schedule in the maker's manual. Watch for hard water, scale on fixtures or a brine tank that smells, and clean when you see those signs. Tier1 pairs its system with a cleanser every 3 months.
Do I need to unplug the softener before cleaning it?
Yes. Unplug the appliance before cleaning it, and set the bypass valve so the house still gets water. Read the maker's manual for the bypass location on your model.
What salt do I put back in the brine tank?
Use the salt type the maker's manual calls for, and fill the brine tank to the level the manual shows. Keep the salt dry, and do not overfill the tank.





