How-to · Water Softeners
How Often Does a Water Softener Need Salt
A water softener needs salt whenever the level in the brine tank drops below the water line. Check the tank often and add salt before it runs out, because a softener with no salt stops removing hardness and hard water comes back through your taps. How fast the salt is used depends on your water use and hardness, so follow the schedule in the maker's manual.
Check the salt level
Open the brine tank and look at the salt. The salt should sit above the water line, where you can see it. If the salt has dropped to the water line or below it, add more. Check the level each time you pass the softener, and write down what you see so you notice when the level starts to fall faster.
Watch for signs the salt is low
A softener that is out of salt stops removing hardness, so hard water signs come back. Look for spots on dishes and glassware, soap scum on fixtures, and scale building up again in heaters, dishwashers and washing machines. If you notice these signs, check the brine tank before anything else.
Add salt to the brine tank
Pour salt into the brine tank until the level sits above the water line, then close the lid. Use the salt type the maker's manual calls for, and do not overfill the tank. After you add salt, let the softener run its next regeneration cycle before you judge the water. If the water stays hard after a full cycle, check the tank again and read the manual.
Let the metered control head work
A metered softener tracks your water use and starts a regeneration cycle only when the resin needs it, so salt use follows demand instead of a fixed clock. The Aquasure Harmony Series has a fully programmable digital display that lets you customize auto-flush intervals for your incoming water quality and water usage. The Tier1 system uses metered regeneration that tracks household demand and starts a cycle only when required, which helps reduce excess cycling.
Follow the maker's manual
The manual for your model gives the salt schedule, the salt type and the fill level for your brine tank, so keep it where you can reach it. If the softener stops softening even with salt in the tank, or you see an error on the display, contact the maker or a repair service instead of opening the unit.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
Its automatic digital metered control head lets you customize auto-flush intervals, and its backlit digital display allows for easy monitoring.
View on Amazon -
Tier1 32,000 Grain Water Softener System
Its metered regeneration tracks household demand and starts a cycle only when required, and its 32,000-grain capacity suits 3-4 bathroom homes.
View on Amazon -
Superior Filters Whole House Water Softener System
Its 32,000-grain resin reduces the need for frequent regeneration, which saves water, salt and potassium and lowers overall system maintenance.
View on Amazon -
H&G Lifestyles Whole House Water Softener
Its 24,000-grain resin can be regenerated for extended use, and its NSF certified food grade resin removes calcium and magnesium.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
What happens if a water softener runs out of salt?
It stops removing hardness, so hard water returns to your taps and spots and scale can come back. Refill the brine tank with salt and let the softener run a regeneration cycle, then check the water again.
How do I know the salt level is low?
Open the brine tank and look. If the salt has dropped to the water line or below it, or you cannot see salt above the water, add more and follow the schedule in the maker's manual.
Does a metered softener use less salt?
A metered control head tracks demand and starts regeneration only when required, which helps reduce excess cycling. Salt use then follows your water use and hardness instead of a fixed clock, so check the brine tank and follow the maker's manual.





