How-to · Water Softeners
How to Add Salt to a Water Softener
To add salt to a water softener, open the lid on the brine tank, check the salt level, and pour salt in until the tank holds enough for the next regeneration, following the fill guidance in the maker's manual. Close the lid and let the control head run the system as programmed. The steps below walk through the job in order.
Find the brine tank
The salt goes in the brine tank, not the tall mineral tank. On the Tier1 system, the salt tank measures 13.5 inches by 32 inches beside a 9 inch by 53 inch mineral tank. Look for the shorter, wider tank with a lid on top, then open the lid to reach the salt inside.
Check the salt level
Open the lid and look at the salt inside the brine tank. Add salt when the level looks low, before the next regeneration. If you cannot see salt, add more as the maker's manual shows. Do not wait until the tank is empty.
Pour in the salt
Pour salt straight into the brine tank, keeping it inside the tank and off the rim. Hold the bag with both hands so the salt pours where you aim it. Add the amount the maker's manual shows for your model, then close the lid. Wipe away any salt that lands outside the tank.
Close the lid and check the display
Close the brine tank lid so it sits flat. Look at the control head display to confirm the system is set to run as programmed. The Aquasure Harmony Series has a backlit digital display for setting auto-flush intervals, and the Tier1 system uses metered regeneration that starts only when household demand calls for it. If the display shows an alert, follow the maker's manual.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
Its 32,000-grain system has a digital metered control head with a backlit display for setting auto-flush intervals and monitoring the system.
View on Amazon -
Tier1 32,000 Grain Water Softener System
Its salt tank measures 13.5 inches by 32 inches, and its metered regeneration control starts a cycle only when household demand calls for it.
View on Amazon -
Superior Filters Whole House Water Softener System
Its 32,000-grain resin fits standard residential systems, and a funnel helps with precise filling.
View on Amazon -
H&G Lifestyles Whole House Water Softener
Its 24,000-grain resin regenerates for continued use, and its system includes 1-inch PVC piping and 2 control valves.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
How do I know when to add salt to my water softener?
Open the brine tank lid and look at the salt level. Add salt when the level looks low, and follow the schedule in the maker's manual.
Where does the salt go in a water softener?
Salt goes in the brine tank, the shorter tank with a lid beside the tall mineral tank. Pour it straight into the brine tank and close the lid.
What happens if a water softener runs out of salt?
The resin cannot regenerate without salt, so check the brine tank level and add salt as the maker's manual shows.
Do I need to turn off the water softener to add salt?
No. Adding salt only opens the brine tank lid, so leave the system running and close the lid when you finish.





