How-to · Water Softeners
How to Change Salt in a Water Softener
To change the salt in a water softener, lift the lid off the brine tank and check how much salt is left. Add salt to the level the maker's manual gives, then close the lid and let the softener run a regeneration cycle as the manual says. Check the salt level again after the cycle and top it up if it has dropped.
Open the brine tank
Find the brine tank and lift off its lid. Look inside to see how much salt is left and whether the salt has formed a hard crust above the water. If the salt looks low or crusted, it is time to add salt. Note the salt level before you add any, so you can tell how much the softener uses.
Add salt to the tank
Pour salt into the brine tank up to the level the maker's manual gives, keeping the salt below the top of the tank. Use the kind of salt the manual names for your softener. If a hard crust has formed, break it up with a broom handle or a similar tool before you add fresh salt, so the salt can drop into the water below.
Run a regeneration cycle
Close the lid and start a regeneration cycle from the control head, following the steps in the maker's manual. The cycle flushes the resin with salty water and then rinses it, so the softener can soften water again. Wait for the cycle to finish before you use hot water, and check the salt level again after it ends.
Check the salt often
Look in the brine tank on a regular schedule and add salt before the tank runs dry, following the schedule in the maker's manual. A tank that runs out of salt cannot soften water until you refill it and run a regeneration cycle. Keep spare salt on hand so a refill is ready when the level drops.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
A 32,000 grain softener with a digital metered control head for 1-2 bathrooms, backed by a 5-year warranty.
View on Amazon -
Tier1 32,000 Grain Water Softener System
A 32,000 grain softener for 3-4 bathroom homes with a ceramic valve, 1 cubic foot of resin and a 10-year tank warranty.
View on Amazon -
Superior Filters Whole House Water Softener System
A 32,000 grain resin with 7% cross-link beads, filled with a funnel for easy, precise filling.
View on Amazon -
H&G Lifestyles Whole House Water Softener
A 24,000 grain softener with NSF certified food grade resin, 1 inch PVC piping and 2 control valves.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
What kind of salt goes in a water softener?
Use the kind of salt the maker's manual names for your softener. Do not use table salt or rock salt unless the manual says it is suitable, and keep the salt dry before it goes in the tank.
How do I know the salt level is low?
Lift the lid and look in the brine tank. If you can see water with little or no salt above it, or a hard crust has formed above the water, add salt. Check the level on the schedule in the maker's manual.
Why is my water still hard after adding salt?
The softener may need a regeneration cycle after a refill, so start one from the control head and wait for it to finish. If the water stays hard, check the manual for the next step or contact the maker.





