How-to · Water Softeners
How to Clean a Water Softener Filter
To clean a water softener filter, put the softener in bypass, take the filter out as the maker's manual shows, and rinse it with water until the sediment is gone. Wash it with mild dish soap or white vinegar only if the manual allows it, let it dry, then fit it back and run the rinse cycle the manual calls for.
Put the softener in bypass
Unplug the softener before you touch the filter, and put the unit in bypass as the maker's manual shows. Bypass stops water flowing through the softener while you work. Keep a towel and a bucket nearby, since water left in the filter housing will spill when you open it. Work in good light so you can see the sediment on the filter.
Take the filter out
Open the filter housing as the manual shows and lift the filter out. Note which way it sits so it goes back the same way. Look at the filter in good light: sediment shows as grit, sand or a gray film on the surface. If the filter is torn, cracked or warped, replace it with the maker's own part instead of cleaning it.
Rinse and wash the filter
Rinse the filter under running water and rub the surface gently with your fingers or a soft brush to lift the sediment. Wash it with mild dish soap or white vinegar only if the manual allows it, and rinse it again until the water runs clear. Never mix cleaners, and never use bleach. Let the filter dry fully before it goes back in.
Fit it back and rinse the system
Fit the filter back the way it came out and close the housing as the manual shows. Take the softener out of bypass, plug it back in, and run the rinse or regeneration cycle the manual calls for. Check the housing and the fittings for drips while the cycle runs. If water keeps leaking, or the filter keeps clogging soon after cleaning, contact the maker or a repair service.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
A 32,000 grain softener with an automatic digital metered control head, a bypass valve and a 5-year warranty.
View on Amazon -
Tier1 32,000 Grain Water Softener System
A 32,000 grain softener with a ceramic valve, metered regeneration, a sediment prefilter and 1 cu ft of NSF/ANSI 44 resin.
View on Amazon -
Superior Filters Whole House Water Softener System
Replacement resin with a 32,000 grain capacity for water softener systems, filled with a funnel when the resin needs replacing.
View on Amazon -
H&G Lifestyles Whole House Water Softener
A 24,000 grain softener with NSF certified food grade resin, silver-enhanced material and 2 control valves.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
How often should I clean the filter?
Follow the schedule in the maker's manual. Clean it sooner if the filter looks gray, the water flow drops, or the unit asks for attention.
Can I use vinegar to clean the filter?
Only if the maker's manual allows it. Rinse the filter with water first, wash it with white vinegar if the manual allows it, then rinse it again until the water runs clear.
What if the filter is damaged?
Replace it with the maker's own part. A torn, cracked or warped filter will not seal or catch sediment as it should, so cleaning it will not help.





