How-to · Water Softeners
How to Clean a Water Softener Tank
To clean a water softener tank, put the softener in bypass, empty the brine tank of salt and water, scrub the inside with water and mild dish soap, rinse it, and refill it with salt. Run a regeneration cycle as the manual says, and check the tank for buildup when the water smells different or the salt level stops dropping. Follow the schedule in your system's manual.
Put the softener in bypass
Find the bypass valve on your softener and turn it to bypass, so water stops flowing to the tank while you clean. If your model has a control head, follow the manual to set it for cleaning. Keep the bypass on until the tank is clean and refilled, so dirty water does not reach the house.
Empty the brine tank
Scoop the salt out of the brine tank into a bucket, and set it aside if it is still in good shape. Bail or siphon the water out of the tank until it is empty. Lift out any salt crust or residue stuck to the bottom and sides, and throw it away. Leave the tank empty so you can see the inside clearly.
Scrub and rinse the tank
Scrub the inside of the tank with water and mild dish soap, using a soft brush or cloth on the walls and floor. Use white vinegar on stubborn buildup if the manual allows it. Rinse the tank with water until the soap and loosened residue wash out. Wipe the inside dry with a cloth before you refill it.
Refill with salt and restart
Pour fresh softener salt into the tank up to the fill line the manual names, and spread it evenly. Turn the bypass valve back to service and check for drips around the tank. Run a regeneration cycle as the manual says, so the fresh salt brine reaches the resin. Check the salt level after the cycle and top it up if it dropped.
When to clean again
Clean the tank again when you see buildup on the walls, a crust on the salt, or water that smells different. A salt level that stops dropping can mean a salt bridge, so break it up and check the tank. Follow the schedule in your system's manual, and use the maker's own cleanser if the manual names one.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
Its 32,000-grain capacity and digital metered control head let you set auto-flush intervals for your water quality and use.
View on Amazon -
Tier1 32,000 Grain Water Softener System
Its metered regeneration runs only when needed, and its own cleanser is used one bottle every 3 months.
View on Amazon -
Superior Filters Whole House Water Softener System
Its 32,000-grain resin fills with a funnel for easy, precise filling, and its 7% cross-link resin supports ion exchange.
View on Amazon -
H&G Lifestyles Whole House Water Softener
Its 24,000-grain resin can be regenerated for extended use, and its 1-inch PVC piping and 2 control valves give a leak-proof seal.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
How often should I clean my water softener tank?
Clean it when you see buildup on the walls, a crust on the salt, or water that smells different. Follow the schedule in your system's manual, and clean it sooner if the salt level stops dropping.
What should I clean the tank with?
Use water and mild dish soap, or white vinegar on stubborn buildup if the manual allows it. Use the maker's own cleanser if the manual names one, and rinse the tank until the soap washes out.
Why is there a crust on top of the salt?
A crust forms when salt hardens above the water line, and it can stop the salt level from dropping. Break the crust up, lift out the hard pieces, and check the tank for buildup underneath.
Do I need to drain the whole system to clean the tank?
No. Put the softener in bypass and empty only the brine tank, so the rest of the system stays full. Follow the manual for your model, and hire a licensed plumber if the manual says so.





