Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

How to Use a Water Softener

Short answer

To use a water softener, keep salt in the brine tank, set the control head for your water hardness, and let the unit regenerate on its metered schedule. The resin swaps hard minerals out of the water, and regeneration flushes the resin clean with salt water so it can soften again. The steps below walk through salt, settings, regeneration and upkeep.

  1. Check the salt level

    Open the brine tank lid and look at the salt. Add salt when the level drops and you can see water above the salt, and use the salt type the maker's manual names. Keep the tank covered between checks so dust stays out. If the salt forms a hard crust above the water, break it up gently so the brine can form, and follow the manual if the crust will not break.

  2. Set the control head

    Set the hardness level, the time of day and the regeneration schedule on the control head, using the buttons and display on the unit. The Aquasure Harmony has a backlit digital display for setting auto-flush intervals, and the Tier1 uses metered regeneration that starts only when household demand requires it. Write down the settings you choose, and change them only when your water source or household size changes.

  3. Know when it regenerates

    Regeneration flushes the resin with salt water and sends the rinse to the drain, so do not use water during the cycle if the manual says to wait. A metered unit regenerates only when it has softened its rated grains, so the timing follows your water use rather than a fixed clock. Watch for signs that regeneration is due: spots return on dishes, soap stops lathering, or the water feels hard again. If those signs appear, check the salt, then check the settings on the control head.

  4. What grain capacity means

    Grain capacity is the amount of hardness the resin can remove before the unit must regenerate, and the makers state it in grains. The Aquasure, Tier1 and Superior Filters models here are rated at 32,000 grains, and the H&G Lifestyles model at 24,000 grains. A higher grain figure means longer runs between regenerations for the same water, and the makers size their units by bathrooms: the Aquasure for 1 to 2 bathrooms and the Tier1 for 3 to 4 bathroom homes. Match the grain figure and the bathroom count to your home, and follow the maker's manual for the rest.

  5. Keep the resin and tank clean

    Check the sediment prefilter if your unit has one, and rinse or replace it as the maker's manual says. The Tier1 system includes a sediment prefilter, and its cleanser is used at one bottle every 3 months. Wipe the outside of the tank with water and mild dish soap if the manual allows it, and keep the brine tank lid closed. If the unit stops softening, check the salt and the settings, then contact the maker or a repair service.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

How do I know when to add salt?

Open the brine tank lid and look. Add salt when the level drops and you can see water above the salt, and use the salt type the maker's manual names. Keep the tank covered between checks.

What does grain capacity mean?

It is the amount of hardness the resin can remove before the unit must regenerate. The Aquasure, Tier1 and Superior Filters models here are rated at 32,000 grains, and the H&G Lifestyles model at 24,000 grains.

Do I need a plumber to install a water softener?

Follow the maker's installation manual, and hire a licensed plumber where the manual says so. The H&G Lifestyles system comes with 1-inch PVC piping and 2 control valves for its main water line setup.

How often does a water softener regenerate?

It depends on your water use. A metered unit regenerates only when it has softened its rated grains, so follow the schedule in the maker's manual and watch for spots on dishes or water that feels hard.

More water softeners how-tos