How-to · Water Softeners
How to Use Water Softener Cleaner
To use water softener cleaner, pour it into the brine tank and run a regeneration cycle so the cleaner moves through the resin. Follow the manual for the cleaner type and the schedule, and check the control display after the cycle finishes.
Read the manual first
Open the manual for your softener before you add anything. The manual names the cleaner type the system takes and the schedule to follow, so use only the cleaner the manual allows. If the manual calls for a licensed installer or plumber for any step, hire one and do not work on the water line yourself. Keep the manual nearby while you work through the steps below.
Add the cleaner to the brine tank
Lift the lid off the brine tank and pour in the cleaner. Use the amount the manual states, and do not mix cleaners. Put the lid back on the tank and close it. If the tank holds salt, leave the salt in place and add the cleaner on top of it.
Run a regeneration cycle
Start a regeneration cycle from the control head so the cleaner moves through the resin and the system flushes. Let the cycle finish on its own before you draw water from a tap. Do not open the brine tank or adjust the control head while the cycle runs. When the display shows the cycle is done, the softener is back in service.
Check the softener after the cycle
After the cycle finishes, look at the control display and the salt level in the brine tank. If the display shows an alert, follow the manual for what to do next. If the water still smells or looks wrong after the cycle, contact the maker or a repair service and do not open the softener yourself.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
Its fully programmable digital control head sets auto-flush intervals for the 32,000 grain system that serves 1 to 2 bathrooms.
View on Amazon -
Tier1 32,000 Grain Water Softener System
Use one bottle of its own cleanser on the 3-month schedule to keep the warranty extension, with a metered control that regenerates only when needed.
View on Amazon -
Superior Filters Whole House Water Softener System
Its 32,000 grain resin tackles high water hardness and extends the time between regeneration cycles.
View on Amazon -
H&G Lifestyles Whole House Water Softener
Its 24,000 grain resin regenerates for extended use, and the system works on well and city water.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
How often should I use water softener cleaner?
Follow the schedule in the maker's manual. The Tier1 system extends its warranty up to 5 years with system registration and one bottle of its cleanser every 3 months, so the manual is the guide for your system.
Where does the cleaner go?
Pour it into the brine tank, then run a regeneration cycle so the cleaner moves through the resin. Do not pour it into the water line or mix it with other cleaners.
What if the softener still smells after cleaning?
Check the control display for an alert and follow the manual. If the smell stays, contact the maker or a repair service and do not open the softener yourself.





