How-to · Water Softeners
What Water Softener Salt Is Used For
Water softener salt goes in the brine tank, where it makes the brine that recharges the resin during regeneration. The resin swaps hardness minerals out of the water, and the brine flushes those minerals away so the resin can soften water again. Without salt in the brine tank, the softener cannot regenerate, and the resin stops softening the water.
What water softener salt does
Salt sits in the brine tank and dissolves in water to form brine. During regeneration, the softener draws that brine through the resin bed. The brine flushes the hardness minerals the resin collected out of the water, and the resin is recharged so it can soften water again. The salt itself never softens the water; the resin does the softening, and the salt keeps the resin working.
How regeneration works
Regeneration is the cycle that restores the resin. The Aquasure Harmony and the Tier1 system both use metered regeneration, which starts a cycle based on water use rather than on a fixed schedule. The control head runs brine through the resin, rinses the bed, and returns the softener to service. The Tier1 system also has a sediment prefilter ahead of the softening process, which catches sediment before the water reaches the resin.
Keep salt in the brine tank
Open the brine tank and look at the salt level. When the level runs low, add salt so the softener can make brine for the next regeneration. Use the salt type the maker's manual names, and follow the manual for how far to fill the tank.
Match the system to the home
Grain capacity is the figure to compare: three of the systems here are rated at 32,000 grains, and the H&G Lifestyles system is rated at 24,000 grains. The Aquasure Harmony is made for 1-2 bathrooms, and the Tier1 system is made for 3-4 bathroom homes. Check the maker's bathroom count and grain capacity against the size of the home, and follow the maker's manual for installation.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
A 32,000-grain whole house softener with a digital metered control head, prefilled resin, and a 5-year extended manufacturer warranty.
View on Amazon -
Tier1 32,000 Grain Water Softener System
A 32,000-grain system with a ceramic valve, metered regeneration, a sediment prefilter, and a 10-year limited warranty on the tanks.
View on Amazon -
Superior Filters Whole House Water Softener System
A 32,000-grain resin for standard residential systems, with 7 percent cross-link cation exchange resin for ion exchange.
View on Amazon -
H&G Lifestyles Whole House Water Softener
A 24,000-grain whole house softener with NSF certified food grade resin, rated for 700,000 gallons.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
What does water softener salt do?
Salt makes the brine that recharges the resin. The resin removes hardness minerals from the water, and during regeneration the brine flushes those minerals out of the resin so it can soften water again.
Does the salt soften the water directly?
No. The resin softens the water through ion exchange, and the salt only recharges the resin. The salt sits in the brine tank, and the softener uses the brine during regeneration to restore the resin.
What happens if the brine tank runs out of salt?
The softener cannot make brine, so the resin cannot regenerate and the water stays hard. Add salt to the brine tank and let the softener run a regeneration cycle, following the maker's manual.





