Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

What Backwash Means on a Water Softener

Short answer

Backwash is the flush step of a water softener's regeneration cycle. Water runs backward through the resin tank to flush trapped minerals and sediment out of the resin bed, so the resin can keep catching calcium and magnesium. The control head runs the cycle on its own.

  1. What backwash does

    Backwash means water runs backward through the resin tank instead of forward to the taps. The reverse flow lifts and flushes out the minerals and sediment the resin beads caught from the hard water. That leaves the resin bed clear to catch calcium and magnesium again. Without that flush, the trapped minerals would stay in the bed and the resin would hold less hardness with each cycle.

  2. How backwash fits regeneration

    Backwash is one step of the regeneration cycle, not a separate job. When the resin is full, the control head starts the cycle: the bed is flushed, and salt from the brine tank restores the resin so it can catch hardness again. The Tier1 system tracks household demand and starts regeneration only when required. The Aquasure system lets you set auto-flush intervals from its digital metered control head.

  3. What to check on your softener

    Check the salt level in the brine tank as the manual describes, and look at the control head display for the cycle in progress. Signs that the system needs attention are scale returning on taps, spots coming back on dishes, or a light or alert on the control head. Follow the schedule in the maker's manual for cleaning and care, and keep the area around the tanks clear so you can reach the controls.

  4. When to call for help

    If scale keeps returning or the control head shows an alert, follow the schedule in the maker's manual and check the salt level again. Do not open the system or work inside it. Contact the maker or a repair service for work inside the system, and follow the maker's manual for installation or hire a licensed plumber where the manual says so.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

Is backwash the same as regeneration?

No. Backwash is the flush step inside the regeneration cycle, when water runs backward through the resin bed. Regeneration is the full cycle that flushes the bed and restores the resin with salt from the brine tank.

How often does a softener backwash?

It depends on the control head. The Tier1 system starts regeneration only when needed, and the Aquasure system lets you set auto-flush intervals. Follow the schedule in the maker's manual.

What should I do if scale comes back?

Check the salt level as the manual describes, and watch the control head display for a light or alert. If scale keeps returning, follow the schedule in the maker's manual and contact the maker or a repair service.

Does backwash waste water?

Every regeneration cycle uses water to flush the resin bed, and a metered control head starts a cycle only when needed. The Tier1 system tracks household demand so it regenerates only when required.

More water softeners how-tos