Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

What Regen Means on a Water Softener

Short answer

Regen is short for regeneration, the cycle in which a water softener cleans its resin so it can keep removing hardness from your water. During regen, salt water from the brine tank rinses the resin and flushes out the calcium and magnesium it trapped. When the cycle ends, the softener goes back to softening water until the resin fills up again.

  1. What regen means

    Regen is short for regeneration. A water softener holds resin that traps calcium and magnesium from the water as it passes through. Over time the resin fills up with those minerals and cannot trap more, so the softener runs a regen cycle to clean the resin. After regen, the resin is ready to trap hardness again, and the softener returns to normal use.

  2. What happens during regen

    During regen, the control head draws salt water, called brine, from the salt tank and sends it through the resin tank. The brine releases the trapped calcium and magnesium from the resin and carries them out of the tank. The resin is then rinsed and left recharged, ready to soften water again. The softener runs this cycle on its own once the resin has taken up its fill of hardness.

  3. Metered regen

    A metered control tracks household demand and starts regen only when required. The Tier1 system uses metered regeneration, which tracks how much water your home uses and starts a regen cycle only when the resin needs it. The Aquasure Harmony Series has a digital metered control head that lets you set the auto-flush intervals to match your water use. A metered softener does not run a cycle before the resin is full, so it runs regen only when the water use calls for it.

  4. Grain capacity and regen timing

    Grain capacity is the figure to compare when you look at how long a softener runs between regen cycles. The Aquasure Harmony Series, the Tier1 system and the Superior Filters system are rated at 32,000 grains by the maker, and the H&G Lifestyles system is rated at 24,000 grains. A higher grain figure means the resin holds more hardness before it needs a regen. Match the maker's grain figure to your water hardness and how much water your home uses.

  5. What to check on your softener

    Check the salt level in the brine tank and the settings on the control head, and follow the schedule in the maker's manual. If the water feels hard again or the display shows a fault, check the salt and the settings, then contact the maker if the problem stays. Do not open the control head or change the plumbing yourself. Follow the maker's installation manual, and hire a licensed plumber where the manual says so.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

How often does a water softener regen?

It depends on the grain capacity and how much water your home uses. The Tier1 system tracks demand and starts a regen cycle only when the resin needs it. A higher grain figure means more time between cycles.

Does regen use salt?

Yes. Regen draws salt water from the brine tank through the resin to release the trapped calcium and magnesium. Check the salt level in the brine tank and follow the maker's manual.

What size water softener do I need?

Compare grain capacity. The Aquasure, Tier1 and Superior Filters systems are rated at 32,000 grains by the maker, and the H&G Lifestyles system is rated at 24,000 grains. Match the figure to your water hardness and water use.

More water softeners how-tos