Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

What the Hardness Setting Does

Short answer

The hardness setting tells the softener how hard your incoming water is, so the control head can work out when the resin needs to regenerate. Set it to the hardness of the water coming into your home, and the softener uses that figure to time regeneration. A setting that is too low or too high changes when regeneration happens, so the figure you enter matters.

  1. What the setting controls

    The hardness setting is the hardness figure you enter for the water coming into your home. The control head uses that figure, together with how much water passes through the unit, to decide when the resin has softened as much water as it can and needs to regenerate. On a metered unit, the control tracks water use and starts regeneration only when the resin is spent, instead of on a fixed schedule. That is why the setting sits at the centre of how the softener runs.

  2. How to set the hardness figure

    Start with the hardness of the water coming into your home, from a water test or from your water supplier. Follow the steps in the maker's manual for your model, and hire a licensed plumber where the manual says so.

  3. What happens when the setting is wrong

    If the setting is lower than your incoming water, the control head waits too long to regenerate, and hard water can pass through before regeneration starts. If the setting is higher than your incoming water, the control head regenerates before the resin needs it, so regeneration happens more often than needed. Either way, the softener is working from the wrong figure, so check the incoming hardness again and correct the setting.

  4. Grain capacity and the setting

    Grain capacity is the amount of hardness the resin can remove before the unit regenerates, and the hardness setting decides how fast that capacity is used up. The Aquasure, Tier1 and Superior Filters units are each rated at 32,000 grains, and the H&G Lifestyles unit is rated at 24,000 grains. A higher incoming hardness uses up that capacity sooner, so the setting and the capacity work together on every regeneration cycle.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

What happens if the hardness setting is too low?

The control head waits too long to regenerate, and hard water can pass through before regeneration starts. Check the hardness of your incoming water again and correct the setting on the control head.

Does the hardness setting change the grain capacity?

No. The grain capacity stays the same, and the setting changes how fast that capacity is used up. The Aquasure, Tier1 and Superior Filters units are rated at 32,000 grains, and the H&G Lifestyles unit is rated at 24,000 grains.

How do I know my incoming water hardness?

Use a water test or ask your water supplier for the hardness figure for your home, then enter that figure on the control head. Follow the steps in the maker's manual for your model.

More water softeners how-tos