Amazon Black Friday Week deals

Paid link

How-to · Water Softeners

What Is a Water Softener Made Of

Short answer

A water softener is made of a resin tank, a brine tank, a control head and a bypass valve. Inside the resin tank, small resin beads catch calcium and magnesium from the water during ion exchange, and salt in the brine tank restores the beads during regeneration. The Aquasure tank is a fiberglass-lined polyethylene tank, and the Superior Filters resin is a polystyrene sulphonate cation exchange resin.

  1. The resin tank and the beads

    The resin tank holds the resin beads that do the softening. The Tier1 system comes preloaded with 1 cubic foot of NSF/ANSI 44 certified cation resin. The Superior Filters resin is a polystyrene sulphonate cation exchange resin with 7 percent cross-link. The H&G system uses a 10 percent crosslink cation resin. The beads sit in the tank while water flows through, and the resin catches the hardness minerals from the water.

  2. The brine tank and the salt

    The brine tank holds the salt that restores the resin. During regeneration, salty water from the brine tank washes over the beads so they can catch hardness minerals again. The Tier1 warranty covers a fiberglass resin tank and a brine tank, and the Aquasure system has a high-strength, corrosion-resistant, fiberglass-lined polyethylene tank. Keep salt in the brine tank as the maker's manual says, and check the salt level when you check the system.

  3. The control head and the bypass valve

    The control head sits on the resin tank and runs regeneration. The bypass valve lets water flow past the softener when you need untreated water, and the Aquasure system includes a bypass valve. Follow the maker's manual for the settings.

  4. What the grain figure means

    The grain figure is the maker's rated capacity: how much hardness the system can remove before it needs regeneration. The Aquasure, Tier1 and Superior Filters systems are rated 32,000 grains, and the H&G system is rated 24,000 grains. A higher grain figure means a longer run between regenerations for the same water, so compare the grain figure with the hardness of your water and the size of your home.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Home Water Softener, which compares them spec by spec.

FAQ

What is the resin in a water softener?

It is a cation exchange resin made of small beads, such as the polystyrene sulphonate resin in the Superior Filters system. The beads catch calcium and magnesium from the water, and salt restores them during regeneration.

What is the brine tank for?

The brine tank holds the salt that restores the resin beads. During regeneration, salty water from the brine tank washes over the beads so they can catch hardness minerals again.

Do I need a plumber to install a water softener?

Follow the maker's installation manual and hire a licensed plumber where the manual says so. The H&G system comes with 1-inch PVC piping and 2 control valves for its main water line setup.

More water softeners how-tos