How-to · Water Softeners
What Maintenance Does a Water Softener Need?
A water softener needs salt in the brine tank, a control head that runs regeneration on schedule, and a brine tank and resin kept clean. Check the salt level, watch the display for alerts, and follow the schedule in the maker's manual. The routine is checking and topping up, with a deeper clean of the tank and resin when the manual calls for it.
Keep the brine tank filled with salt
Open the brine tank and look at the salt level. Top up the salt before the tank runs dry, using the salt type the manual names. If a crust of salt sticks above the water, break it up so the salt drops into the water and the softener can draw brine. Wipe salt dust from the rim of the tank as you go.
Check the control head and settings
Look at the control head display and confirm the settings match the manual. The display shows the regeneration schedule and the current settings, so a wrong setting stands out before the water turns hard. If the display shows an alert or the softener misses a regeneration, follow the manual for the next step.
Clean the brine tank
Unplug the softener before you clean it. Empty the brine tank, scoop out loose salt, and wash the inside with water and mild dish soap if the manual allows it. Rinse the tank, let it dry, and refill it with salt. A tank with sludge or a crust at the bottom needs the same wash before it goes back into use.
Look after the resin
The resin inside the tank does the softening, and it needs brine and regular regeneration to keep working. Use the maker's own cleanser only if the manual allows it, and follow the manual for how to run a cleaning cycle. If the water stays hard after a cleaning cycle, contact the maker or a repair service.
Check for leaks and follow the manual
Look around the tanks, valves and pipes for water on the floor or damp spots, and follow the manual for what to do if you find any. Keep the manual with the softener and follow its schedule for salt, cleaning and checks. For repairs inside the unit, contact the maker or a repair service.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Aquasure Harmony Series
A 32,000-grain softener with a fully programmable backlit digital display for auto-flush intervals, prefilled resin, and a 5-year extended manufacturer warranty.
View on Amazon -
Tier1 32,000 Grain Water Softener System
A 32,000-grain softener with a ceramic valve, a 1 cubic foot resin tank, metered regeneration, and a 10-year limited warranty on the fiberglass resin tank and brine tank.
View on Amazon -
Superior Filters Whole House Water Softener System
A 32,000-grain water softener resin with rapid ion exchange, for standard residential systems.
View on Amazon -
H&G Lifestyles Whole House Water Softener
A 24,000-grain softener with NSF certified food grade resin, a 10% crosslink cation resin, and 1-inch PVC piping with 2 control valves.
View on Amazon
These come from our ranked list Best Home Water Softener, which compares them spec by spec.
FAQ
How do I know the salt level is low?
Open the brine tank and look at the salt. If the salt sits below the water line or the tank looks empty, add salt of the type the manual names. A crust of salt stuck above the water, called a salt bridge, needs breaking up so salt can drop into the water.
What should I do if the water feels hard again?
Check the salt level first, then check the control head display and the settings. If the salt is full and the settings look right, follow the maker's manual for the next step, and contact the maker or a repair service if the problem stays.
Can I clean the brine tank myself?
Yes, if the manual allows it. Unplug the softener, empty the tank, and wash it with water and mild dish soap, then rinse and let it dry before you refill it with salt. Use the maker's own cleaner or descaler only if the manual allows it.





