How-to · Robotic Pool Cleaners
How Automatic Pool Cleaners Work
An automatic pool cleaner is a small robot that moves around the pool on its own, scrubbing the floor and walls and collecting leaves, dirt, and sand in its filter. Some plug into a power supply, while others run on a battery and stop when the battery runs low. You place it in the water, start a cycle, and lift it out to empty the filter when it finishes.
How a robotic cleaner moves
A robotic pool cleaner moves on tracks or wheels along the pool floor, and the cleaner steers itself around the pool. Some models use sonar navigation to map the pool and plan a route, so the cleaner covers the floor in a pattern instead of wandering. Wall-climbing models drive up the sides to scrub the walls and the waterline. The cleaner keeps moving until the cycle ends or the battery runs low.
How it collects dirt
Brushes on the cleaner scrub the floor and walls as it moves, loosening dirt and leaves. Suction pulls the loosened dirt into a filter basket or debris basket inside the cleaner. The basket holds leaves, sand, dirt, and small twigs until the cycle ends. Lift the cleaner out of the water and empty the basket over a trash can, then rinse it with water if the manual allows it.
Plug-in and cordless models
A plug-in cleaner connects to a power supply and runs on a cord, while a cordless cleaner runs on a battery and moves without a cord. Some cordless cleaners park near the pool wall or return to the edge when the battery runs low, so check what the model you own does. Charge the battery after a cycle, following the maker's manual, so the cleaner is ready for the next one.
What to check before you buy
Match the cleaner to your pool. Check whether the maker lists it for in-ground or above-ground pools, and the pool length or area it is rated for. The Dolphin Nautilus CC Plus is listed for in-ground pools up to 40 feet long, while the ABNEMEN and Letexpool cleaners are listed for above-ground pools. Also check whether the cleaner climbs walls and the waterline, and whether the filter basket lifts out from the top for emptying.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Dolphin Nautilus CC Plus Wi-Fi Automatic Robotic
A plug-in robotic cleaner with Wi-Fi scheduling, a wall-climbing scrubber brush, and a top-load filter basket, for in-ground pools up to 40 feet long.
View on Amazon -
ABNEMEN Cordless Robotic Pool Cleaner
A cordless cleaner with sonar navigation, track drive, wall climbing, and up to 180 minutes of runtime, with self-parking and a top-loading filter.
View on Amazon -
Cordless Robotic Pool Vacuum
A cordless cleaner with sonar navigation, track drive, three cleaning modes, and up to 150 minutes of runtime for pools up to 2150 square feet.
View on Amazon -
Letexpool S1 Pro Cordless Robotic Pool Cleaner
A cordless cleaner with a dual-motor system, a large debris basket, one-button operation, and auto parking, with up to 130 minutes of runtime.
View on Amazon
These come from our ranked list Best Automatic Pool Vacuum, which compares them spec by spec.
FAQ
Do automatic pool cleaners need a hose?
No. The cleaners in this article move on their own with a motor and a filter basket. A plug-in model connects to a power supply, and a cordless model runs on a battery.
How long does a cordless pool cleaner run?
It depends on the model. The ABNEMEN runs up to 180 minutes, the SAT25 model runs up to 150 minutes, and the Letexpool S1 Pro runs up to 130 minutes on a full charge. Check the runtime figure the maker lists for the model you own.
Can a pool cleaner climb the walls?
Some can. The Dolphin Nautilus CC Plus, the ABNEMEN, and the SAT25 model each state wall and waterline climbing. Check whether the model you own climbs walls before you count on it.





