How-to · Robotic Pool Cleaners
How to Remove Sand From an Above Ground Pool
Sand sinks to the pool floor, so a cordless robotic cleaner that travels the floor collects it as it moves. Let the water settle first, then place the cleaner in the pool and start a floor cleaning cycle. When the cycle ends, lift the cleaner out and empty its filter basket.
Let the sand settle
Sand is heavier than water, so it drops to the floor of the pool. Wait until the water is still and the sand has settled into piles on the floor before you start cleaning. Check the floor and note where the sand has gathered, so the cleaner passes over it on its cycle.
Run a floor cleaning cycle
Place the cleaner in the pool and start a floor cleaning cycle. The cleaner travels across the floor and collects sand, dirt and leaves as it moves. The WYBOT offers Floor, Wall, Waterline and Combo modes, so choose Floor when the sand sits on the pool floor. The Aiper switches between its two cleaning modes with a short press of the button. Let the cycle finish before you lift the cleaner out.
Empty the filter basket
Lift the cleaner out of the pool when the cycle ends. The Aiper moves to the pool edge by itself when its battery runs low, and the OUCAXIA parks near the wall when the job is done or the battery runs low. Open the filter basket and tip the sand and debris into the trash. The BRINBO filter can be reached and cleaned after each use, and the OUCAXIA filter basket has a quick-rinse design, so rinse it with water and let it dry before the next run.
Match the cleaner to your pool
Check the run time and the pool size each cleaner is rated for. The WYBOT runs up to 125 minutes and is rated for up to 1,220 sq. ft. by the maker, the BRINBO runs up to 90 minutes and is rated for up to 861 sq. ft. by the maker, and the Aiper runs 90 minutes and is rated for up to 860 sq. ft. by the maker. The OUCAXIA runs 150 minutes and is rated for up to 1300 sq. ft. by the maker. Pick the one rated for your pool on one charge.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
WYBOT B1 Cordless Robotic Pool Vacuum
A cordless cleaner with a 125-minute run time, Floor, Wall, Waterline and Combo modes, and app control for above ground pools.
View on Amazon -
BRINBO S2 Pool Vacuum Robot for Above Ground
A cordless cleaner with a 90-minute run time, dual-layer filtration and coverage up to 861 sq. ft. for above-ground pools.
View on Amazon -
2026 Aiper Scuba SE Cordless Pool Vacuum
A cordless cleaner with two cleaning modes, 90 minutes of run time and self-parking at the pool edge when the battery runs low.
View on Amazon -
OUCAXIA Y10 Robotic Pool Cleaner
A cordless cleaner with a 150-minute run time, a 2.2L filter basket and self-parking near the pool wall.
View on Amazon
These come from our ranked list Best Above Ground Pool Vacuum, which compares them spec by spec.
FAQ
Can a robotic pool cleaner pick up sand?
Yes. The WYBOT, BRINBO and OUCAXIA cleaners all collect sand from the pool floor as they travel, and the WYBOT uses roller brushes to move across drains and seams. Run a floor cycle and empty the filter basket when it ends.
How do I get the cleaner out when it stops?
The Aiper moves to the pool edge when its battery runs low, and the OUCAXIA parks near the wall when the job is done or the battery runs low. Lift the cleaner out by its handle and empty the filter basket.
Can I use the cleaner on the pool walls too?
The WYBOT has Floor, Wall, Waterline and Combo modes, so it cleans walls and the waterline as well as the floor. The BRINBO and the Aiper travel the pool floor, so they suit sand that has settled on the floor.



