How-to · Robotic Pool Cleaners
How to Vacuum Sand From a Pool
Sand on the pool floor is picked up by a robotic pool cleaner that runs on battery power and traps fine debris in its filter. The Gosvor, CZYBYTE, WYBOT and Hinice cleaners each run cordless and collect sand from the floor, and the first three also climb walls and the waterline. Drop the cleaner in, let it run its cycle, then lift it out and empty the filter basket.
Pick a cleaner that traps sand
Sand is fine debris, so the filter decides how much stays in the cleaner. The Gosvor uses double filtration that captures 3-micron debris, the CZYBYTE basket has a 150-micron dense mesh, and the WYBOT basket has a 180-micron mesh. The Hinice uses a dual-layer filter with dual brushes that pick up sand, leaves and tiny particles from the pool floor. Check the mesh figure before you buy, since a coarse filter lets fine sand pass through.
Match runtime and coverage to the pool
Compare the runtime and the pool size each maker gives. The Gosvor runs up to 200 minutes and is rated for up to 2,153 sq ft by the maker, the WYBOT runs 120 to 160 minutes for pools up to 1,614 sq ft, the CZYBYTE runs 120 minutes for pools up to 2,000 sq ft, and the Hinice runs 150 minutes for pools up to 2,153 sq ft. Pick a cleaner whose stated coverage covers your pool, and recharge it between runs as the manual says.
Run the cleaner and empty the basket
Set the cleaner in the pool and press the start button, then let it run its cleaning cycle on the floor. The Gosvor, CZYBYTE and WYBOT cleaners also climb the walls and the waterline, so sand stuck near the edge gets picked up too. When the cycle ends, lift the cleaner out of the pool and empty the filter basket, then rinse the basket before the next run.
Use the app and check the charge
Three of the cleaners work with a phone app: the Gosvor, the CZYBYTE and the WYBOT. The Gosvor app offers 5 modes and lets you set navigation and step settings, and the WYBOT app lets you set routes or run Auto-Smart Mode. Check the battery before each run: the Gosvor runs up to 200 minutes, the WYBOT runs 120 to 160 minutes, and the Hinice runs 150 minutes on a single charge.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
(2026 Upgrade) Gosvor Pool Vacuum LiteVac G1
A cordless cleaner with up to 200 minutes of runtime, wall and waterline cleaning, and a 3.6 L top-load filter basket.
View on Amazon -
CZYBYTE Cordless Robotic Pool Vacuum Cleaner
A cordless cleaner with a 120-minute runtime, wall and waterline climbing, and a 4 L debris basket with 150-micron mesh.
View on Amazon -
WYBOT C1 Cordless Pool Vacuum Robot
A cordless cleaner with 120 to 160 minutes of runtime, wall and waterline cleaning, and app control for routes.
View on Amazon -
Hinice Cordless Robotic Pool Cleaner
A cordless cleaner with a 150-minute runtime, dual brushes, and a dual-layer filter for sand and tiny particles.
View on Amazon
These come from our ranked list Best Pool Vacuum for Sand, which compares them spec by spec.
FAQ
Can a robotic pool cleaner pick up sand?
Yes. The Gosvor captures 3-micron debris, the CZYBYTE basket has a 150-micron mesh, and the WYBOT basket has a 180-micron mesh. The Hinice uses dual brushes and a dual-layer filter to pick up sand from the pool floor.
How long does a robotic pool cleaner run?
The Gosvor runs up to 200 minutes, the WYBOT runs 120 to 160 minutes, the Hinice runs 150 minutes, and the CZYBYTE runs 120 minutes. Check the battery before each run and recharge it when the cycle ends.
Do these cleaners climb the pool walls?
The Gosvor, CZYBYTE and WYBOT cleaners climb walls and the waterline. The Hinice cleans the pool floor, so check its manual for wall cleaning before you buy.





