How-to · Pool Pumps
How to Prime a Pool Pump
To prime a pool pump, fill the pump housing with water before you turn it on, so the pump can pull water from the pool. A pump that has lost its prime runs dry and will not move water. Fill the pump with water, close the lid, and turn the pump on, then watch the water flow.
Turn the pump off and open the lid
Turn the pump off before you open it. Open the strainer cover by hand; the Hayward and Flynsu pumps have swing-away hand knobs for the cover, so no tools are needed. Lift the cover off and set it aside, then take out the basket and clear away leaves and debris.
Fill the pump with water
Fill the pump housing with water before you turn it on. Pour water into the basket until the housing is full, then put the basket back and close the lid. A pump that starts full can pull water from the pool, while a pump that starts dry cannot.
Turn it on and watch the water
Turn the pump on and watch the water through the clear lid. The AQUASTRONG, LINGXIAO and Flynsu pumps have a clear lid, so you can see the water moving without opening the pump. If the water flows steadily, the pump is primed. If the pump runs dry, turn it off and fill it again.
If the pump will not prime
If the pump will not prime, turn it off and check the lid and the basket. Clear leaves and debris from the basket, close the lid, and fill the pump with water again. If it still will not prime, contact the maker or a repair service.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
AQUASTRONG 1 HP Above Ground Pool Pump
A 1 HP self-priming pump with a 4,945 GPH max flow, a built-in timer, a filter basket and a transparent lid.
View on Amazon -
LINGXIAO Pool Pump Inground 1HP 6340GPH Single
A 1 HP self-priming pump with a 6,340 GPH flow, dual voltage, a filter basket and a clear lid.
View on Amazon -
Hayward Super Pump InGround Pool Pump
A 1 HP pump with an extra-large debris basket, swing-away hand knobs and 4-bolt access to internal parts.
View on Amazon -
Flynsu Fits Hayward W3SP1580 PowerFlo LX 1 HP
A 1 HP pump with a 60 GPM flow, a see-through strainer cover, an oversized debris basket and a 12-month warranty.
View on Amazon
These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.
FAQ
How do I know the pump is primed?
The water flows steadily through the pump. If the pump runs dry or the water stops, turn it off and fill it again.
Do I need to prime a self-priming pump?
Yes, the first time. Fill the pump with water before first use, even on a self-priming pump, and let the pump pull water from the pool.
What if the pump loses prime while it runs?
Turn it off and check the lid and the basket. Clear leaves and debris from the basket, close the lid, fill the pump with water again, and turn it on.





