Amazon Black Friday Week deals

Paid link

How-to · Pool Pumps

How Many Hours Should a Pool Pump Run

Short answer

Run the pump until the water stays clear, then check the basket and the water each day. The right run time depends on the pool size, the pump flow and the debris in the water, so watch the water and the basket rather than a fixed number. The AQUASTRONG pump in this guide has a timer with 9 settings from 2 to 24 hours.

  1. Check the water and the basket

    Look at the water before you set the timer. If the water looks cloudy or the basket holds leaves and grit, run the pump longer and empty the basket. If the water stays clear and the basket stays empty, shorten the run time a little at a time. The AQUASTRONG pump has a filter basket with a transparent lid, and the LINGXIAO pump has a removable filter basket with a clear lid, so you can see when cleaning is needed.

  2. Set the timer

    Use the timer on the pump to set the hours for each day. The AQUASTRONG pump has a built-in 24-hour programmable timer with 9 settings from 2 to 24 hours, so pick the setting that matches the water and the basket, then leave it to run at the same time each day. If the water turns cloudy, pick a longer setting and check the basket again.

  3. Match the flow to the pool

    Compare the pump flow with the pool it serves. The LINGXIAO pump has a maximum flow of 6,340 GPH and the AQUASTRONG pump has a maximum flow of 4,945 GPH, both with a 1 HP motor, and the Flynsu pump moves 60 GPM at 1 HP. A higher flow moves the water faster, so a pump with a higher GPH figure can finish the turnover in fewer hours, while a lower flow needs more hours. Read the flow figure on the pump you own and set the timer from what the water shows.

  4. Empty the basket and check the lid

    Switch the pump off and unplug it before you open the basket. Lift the lid, take the basket out and tip the leaves and grit into a trash can, then put the basket back and close the lid. The Hayward pump has swing-away hand knobs for strainer cover removal without tools, and the Flynsu pump has a see-through strainer cover with a swing-away hand knob. Close the lid before you switch the pump back on.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.

FAQ

Can I run the pump at night?

Yes, if the timer is set for the night hours and the basket is empty. The AQUASTRONG pump has a built-in timer with 9 settings from 2 to 24 hours, so set the hours and check the water and the basket the next day.

What flow do I need for my pool?

Compare the pump flow with the pool it serves, using the maker's own figure. The LINGXIAO pump has a maximum flow of 6,340 GPH, the AQUASTRONG pump has a maximum flow of 4,945 GPH, and the Flynsu pump moves 60 GPM, each with a 1 HP motor.

How do I know the pump ran long enough?

Look at the water and the basket. If the water stays clear and the basket holds little debris, the hours are right for that day, and if the water turns cloudy, run the pump longer and empty the basket.

More pool pumps how-tos