How-to · Pool Pumps
How to Clean a Pool Pump
To clean a pool pump, switch it off, unplug it, open the strainer lid, lift out the basket, empty it and rinse it with water. Wipe the lid and the strainer cover, put the basket back, close the lid and plug the pump back in. The pumps in this guide are all 1 HP, and each one has a basket that collects leaves and debris.
Switch off and unplug the pump
Switch the pump off at its timer or switch, then unplug it before you open the strainer lid. The AQUASTRONG pump has a built-in 24-hour programmable timer with 9 selectable operating hours from 2 to 24 hours, so check the timer setting before you switch the pump off. Wait until the pump has stopped before you touch the lid. Follow the schedule in the maker's manual for how often to clean the basket.
Open the lid and lift out the basket
Open the strainer lid and lift the basket out of the housing. The Hayward Super Pump has swing-away hand knobs for strainer cover removal without tools, and the Flynsu pump has a see-through strainer cover with a swing away hand knob. The LINGXIAO pump has a clear lid, and the AQUASTRONG pump has a transparent lid, so you can see the basket before you open it. Hold the basket over a trash can and tip the leaves and debris out.
Empty and rinse the basket
Tip leaves and debris out of the basket, then rinse the basket with water until the water runs clear. Use mild dish soap on the basket only if the manual allows it, and rinse the soap off with water. Do not use bleach or pool chemicals on the basket. Rinse the inside of the strainer housing with water and wipe it with a soft cloth, then check that the basket is ready to go back in.
Wipe the lid and put the basket back
Wipe the lid with a soft cloth and water, and wipe the rim where the lid sits. Put the basket back in the housing and close the lid until it sits flat. The LINGXIAO pump has 2 drain plugs on the bottom for draining, so check that they are closed before you restart the pump. Plug the pump back in and switch it on, then check that water flows and the lid stays in place.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
AQUASTRONG 1 HP Above Ground Pool Pump
A 1 HP pump with a 4,945 GPH max flow, a built-in 24-hour programmable timer and a large filter basket under a transparent lid.
View on Amazon -
LINGXIAO Pool Pump Inground 1HP 6340GPH Single
A 1 HP pump with a 6,340 GPH max flow, dual voltage at 115V or 208-230V, a large removable filter basket and 2 drain plugs.
View on Amazon -
Hayward Super Pump InGround Pool Pump
A 1 HP pump with an extra-large debris basket and swing-away hand knobs for strainer cover removal without tools.
View on Amazon -
Flynsu Fits Hayward W3SP1580 PowerFlo LX 1 HP
A 1 HP pump with a 60 GPM flow, a see-through strainer cover with a swing away hand knob and an oversized debris basket.
View on Amazon
These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.
FAQ
How often should I clean a pool pump basket?
Follow the schedule in the maker's manual. Clean the basket when you can see leaves and debris through the transparent lid on the AQUASTRONG pump or the clear lid on the LINGXIAO pump, and empty it over a trash can.
Can I use dish soap to clean a pool pump basket?
Mild dish soap is fine on the basket only if the manual allows it, and rinse the soap off with water. Never use bleach or pool chemicals on the basket, and never mix cleaners.
What do I do if the pump will not restart after cleaning?
Check that the basket sits flat in the housing, the lid is closed and the pump is plugged in. If the pump still will not restart, contact the maker or a repair service, and do not open the motor or the control parts.





