Amazon Black Friday Week deals

Paid link

How-to · Pool Pumps

Types of Pool Pumps

Short answer

Pool pumps come in single-speed, dual-speed and variable-speed types, and each type suits a different pool setup. Single-speed pumps run at a fixed speed, while variable-speed pumps change speed to match the job. Above-ground and inground pools also use different pump builds, and some pumps self-prime.

  1. Single-speed pumps

    A single-speed pump runs at a fixed speed whenever it is on. It moves water at the same rate from start to finish, so it runs until you switch it off. The LINGXIAO, Hayward and Flynsu pumps are single-speed pumps with a 1 HP motor. A fixed-speed pump is the straightforward choice when you want the same speed for filtering and circulation.

  2. Variable-speed pumps

    A variable-speed pump changes speed to match the job, so it can run at a lower speed for circulation and a higher speed for cleaning. You set the speed on the pump controls instead of running at a fixed speed all day. Check the speed range in the maker's specs before you buy, and match it to the jobs your pool needs. Follow the maker's manual for setup.

  3. Dual-speed pumps

    A dual-speed pump runs at two speeds: a high speed and a low speed. You switch between the speeds on the pump controls to match the job at hand. Use the high speed for cleaning and the low speed for circulation, and follow the maker's manual for switching speeds.

  4. Above-ground and inground pumps

    Above-ground pools use pumps built for that setup, and inground pools use pumps built for inground use. The AQUASTRONG pump is an above-ground pool pump, and the Hayward pump is an inground pool pump. The LINGXIAO pump suits in-ground and above-ground pools, and the Flynsu pump fits above-ground and on-ground pools. Check the pool type in the maker's specs before you buy, and match the pump to your pool.

  5. Self-priming pumps

    A self-priming pump draws water up into the pump on its own, so it can start moving water without hand priming. The LINGXIAO pump is a self-priming pump, and the AQUASTRONG pump is a self-priming pump too. Fill the pump with water before first use to keep the motor from overheating. If a pump is not self-priming, follow the maker's manual for priming it.

  6. What the flow figure tells you

    The flow figure, in gallons per hour, tells you how much water the pump moves. The AQUASTRONG pump has a max flow of 4,945 GPH, and the LINGXIAO pump has a max flow of 6,340 GPH. Compare the maker's flow figure with the flow your pool needs, and check the maker's specs for the voltage and fittings. A higher flow figure means the pump moves more water, so match it to your pool and filter.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.

FAQ

What is the difference between single-speed and variable-speed pool pumps?

A single-speed pump runs at a fixed speed, while a variable-speed pump changes speed to match the job. A fixed speed suits steady filtering and circulation, and a variable speed lets you run slower for circulation and faster for cleaning.

Do I need an above-ground or an inground pool pump?

Match the pump to your pool type. The AQUASTRONG pump is an above-ground pool pump, the Hayward pump is an inground pool pump, and the LINGXIAO pump suits in-ground and above-ground pools.

What does GPH mean on a pool pump?

GPH means gallons per hour, and it tells you how much water the pump moves. The AQUASTRONG pump has a max flow of 4,945 GPH, and the LINGXIAO pump has a max flow of 6,340 GPH.

How do I know when to clean the filter basket?

Check the filtration through the transparent lid, as the AQUASTRONG pump allows, and clean the basket when you see debris, leaves or grit building up. Follow the maker's manual for how to remove and clean the basket.

More pool pumps how-tos