How-to · Pool Pumps
How to Clean a Pool Pump Filter
To clean a pool pump filter, switch the pump off and unplug it, open the strainer cover and lift out the basket, tip the debris into the trash and rinse the basket with water. Wipe the lid, set the basket back in place and close the cover before you plug the pump back in.
Switch the pump off and unplug it
Switch the pump off, then pull the plug from the outlet before you touch the pump. Let the pump stop completely so the water settles and the basket stays still while you work. Keep the plug and cord away from the water while you clean. Read the maker's manual for your pump before you open it.
Open the cover and lift out the basket
Open the strainer cover on top of the pump. The Hayward opens with swing-away hand knobs and no tools, and the Flynsu has a swing-away hand knob on its see-through strainer cover. Lift the basket straight up and out of the pump, keeping it level so debris stays in the basket. Set the basket on the ground beside the pump.
Empty the basket and rinse it
Tip the leaves and debris from the basket into the trash. Rinse the basket with water, turning it so the water reaches each side. If debris sticks to the basket, rub it off with your fingers under the water. Let the basket drip dry before you put it back.
Wipe the lid and check the basket
Wipe the lid with a damp cloth to clear drips and dirt. Look at the basket for leaves or grit caught in the corners, and rinse it again if debris stays behind. Set the basket back in the pump and close the cover.
Plug the pump back in
Plug the pump back in and switch it on. Watch the water move through the pump and check for drips around the lid. If water leaks from the lid, switch the pump off, unplug it and open the cover to seat the basket again. Follow the schedule in the maker's manual for the next cleaning.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
AQUASTRONG 1 HP Above Ground Pool Pump
Its large filter basket lifts out under a transparent lid, so you can see when cleaning is needed, and its 1 HP motor moves 4,945 GPH.
View on Amazon -
LINGXIAO Pool Pump Inground 1HP 6340GPH Single
Its extra-large removable filter basket sits under a clear lid, and its 1 HP motor moves 6,340 GPH with 2 drain plugs for draining.
View on Amazon -
Hayward Super Pump InGround Pool Pump
Its extra-large debris basket lifts out after the swing-away hand knobs open the strainer cover without tools, and 4-bolt access opens the pump for service.
View on Amazon -
Flynsu Fits Hayward W3SP1580 PowerFlo LX 1 HP
Its oversized debris basket sits under a see-through strainer cover with a swing-away hand knob, and its 1 HP motor moves 60 GPM.
View on Amazon
These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.
FAQ
How often should I clean the pump filter basket?
Clean it when the lid shows a full basket. The AQUASTRONG has a transparent lid so you can tell when cleaning is needed, and the LINGXIAO has a clear lid for the same check. Follow the schedule in the maker's manual.
Do I need tools to open the pump cover?
The Hayward opens with swing-away hand knobs and no tools, and the Flynsu has a swing-away hand knob on its see-through strainer cover. For the other pumps, follow the maker's manual.
Can I rinse the basket with a hose?
Yes. Rinse the basket with water until the debris washes off, then let it drip dry before you put it back. Use only water unless the maker's manual allows a cleaner.





