Amazon Black Friday Week deals

Paid link

How-to · Pool Pumps

How to Care for an Above Ground Pool Sand Filter

Short answer

To care for an above ground pool with a sand filter, run the pump on the schedule in the maker's manual, empty the strainer basket, and backwash the filter when the pressure gauge rises or the flow slows. Rinse the filter after backwashing, check the hoses and fittings, and contact the maker or a repair service for work inside the pump or filter.

  1. Run the pump on a schedule

    Switch the pump on and let it run on the schedule in the maker's manual, so the water keeps moving through the filter. Watch the pressure gauge on the filter tank and the flow from the returns while the pump runs. A rising gauge reading or slower flow from the returns is a sign the filter needs attention. Use the timer on the system if it has one, and follow the schedule in the manual for how long the pump runs each day.

  2. Empty the strainer basket

    Switch the pump off and unplug it before you open the strainer basket, so the pump cannot start while your hands are near it. Lift out the basket and empty the leaves and debris, then rinse it with a garden hose. Check the basket for cracks and the lid for a good seal before it goes back. A basket full of leaves slows the flow and puts extra strain on the pump.

  3. Backwash and rinse the filter

    Turn the multi-port valve to backwash when the gauge rises or the flow slows, and let the pump run until the water in the waste line looks clear. Then turn the valve to rinse and run the pump again, so the sand settles back into place before the filter goes back to normal use. Follow the steps in the maker's manual for the valve positions, and switch the pump off before you move the valve.

  4. Check the sand and the tank

    Look at the filter tank, the valve and the fittings for leaks, cracks and loose connections, and tighten or replace a fitting only as the manual allows. Check the sand level through the opening the manual points to, and top it up only with the sand type the manual names. If the sand looks grey or clumped, or the tank is cracked, contact the maker or a repair service instead of opening the tank yourself.

  5. Check hoses and fittings

    Check each hose for kinks, cracks and loose clamps, and check the fittings where the hoses meet the pump and the filter. A loose clamp or a cracked hose lets air into the system and slows the flow, so fix a loose fitting before the pump runs again. Keep the pump and the filter on a level surface, and keep leaves and debris away from the air vents on the pump.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Above Ground Pool Pump, which compares them spec by spec.

FAQ

How do I know the sand filter needs backwashing?

Watch the pressure gauge and the water flow. A rising gauge reading, slower flow from the returns, or a filter that looks dirty are signs to backwash. Follow the schedule in the maker's manual.

How often should I run the pump?

Follow the schedule in the maker's manual for your pool and your pump. Run the pump until the water circulates through the filter, and use the timer on the system if it has one.

Can I use pool chemicals to clean the sand?

No. Rinse the sand with water through the backwash and rinse steps, and follow the manual for the care of the filter. Never add pool chemicals to the filter, and never mix cleaners.

More pool pumps how-tos