Amazon Black Friday Week deals

Paid link

How-to · Pool Pumps

How to Clean a Pool Water Filter

Short answer

To clean a pool water filter, switch the pump off and unplug it, open the strainer cover, lift out the debris basket, empty it, rinse it with water, and put it back before you restart the pump. The basket catches leaves and debris before they reach the pump. Follow the steps in the maker's manual for your pump.

  1. Switch the pump off

    Switch the pump off and unplug it from the outlet before you touch the strainer cover. Read the maker's manual for your pump before you start, and follow its steps for shutting the pump down. Do not open the cover while the pump is running or plugged in.

  2. Open the cover and lift out the basket

    Open the strainer cover and lift out the debris basket. On the Hayward Super Pump, swing-away hand knobs open the strainer cover without tools, and the Flynsu pump has a swing-away hand knob on its see-through strainer cover for easy service. Empty the leaves and debris from the basket over a trash can, and tap the basket until the loose dirt falls out.

  3. Rinse the basket with water

    Rinse the basket under running water until the dirt washes away. Use mild dish soap only if the maker's manual allows it, and rinse the soap away fully before the basket goes back in. Never mix cleaners. Let the basket drain before you refit it.

  4. Refit the basket and restart the pump

    Seat the basket back in the strainer housing and close the cover until it sits flat. On the LINGXIAO pump, close the two drain plugs on the bottom before you restart. Plug the pump back in, switch it on, and check that the pump is running again.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.

FAQ

How do I know the pool filter basket needs cleaning?

Open the strainer cover and look at the basket. The AQUASTRONG pump has a transparent lid that shows when cleaning is needed, and the LINGXIAO pump has a clear lid for viewing the basket. A basket holding leaves and debris is ready to empty.

Can I use soap to clean a pool filter basket?

Rinse the basket with water first. Use mild dish soap only if the maker's manual allows it, and rinse the soap away fully before the basket goes back in. Never mix cleaners.

How often should I clean the pool water filter?

Clean the basket when you can see leaves and debris in it or when water flow drops. Follow the cleaning schedule in the maker's manual for your pump, and check the basket after storms or heavy pool use.

More pool pumps how-tos