How-to · Pool Pumps
How to Maintain a Sand Filter Pool Pump
To maintain a sand filter pool pump, switch it off, empty and rinse the filter basket, check the lid and seals, and backwash the sand filter when the flow drops. Clear the basket often during heavy use, and follow the schedule in the maker's manual for the rest. A pump with a clear basket keeps the water moving and the filter working.
Switch off the pump first
Switch the pump off and unplug it before you open the basket or touch any part of the pump. Water and power do not mix, so make sure the pump cannot start while your hands are inside. If the pump plugs into an outdoor outlet, pull the plug and keep it dry while you work. Follow the maker's manual for your model before you open anything.
Empty and rinse the filter basket
Lift the lid and take the basket out of the pump. Tip leaves and debris into a trash can, then rinse the basket with water until the mesh runs clear. Look the basket over for cracks or bent mesh, and set it back in place so it sits flat. A basket full of leaves slows the water, so check it often when leaves fall.
Check the lid and seals
Wipe the lid and the rim clean so the lid sits flat when you close it. A clear lid lets you see the basket without opening the pump, so look through it when you check the water flow. If the lid does not sit flat or water drips from the rim, check the maker's manual for the right seal and fit. Do not force a lid that will not close.
Backwash the sand filter
When the water flow drops or the basket stays clean while the pool looks dull, backwash the sand filter following the filter manual. Backwashing sends water through the sand in reverse and flushes out the dirt the sand has caught. Return the valve to the filter setting after the wash, and check that the water runs clear before you walk away.
Check the timer, fittings and motor
Set the timer so the pump runs each day, and check that it starts and stops as set. The AQUASTRONG timer offers nine selectable operating hours from 2 to 24 hours. Look over the fittings and unions for drips, and keep leaves and dust away from the motor. If the motor hums without moving water, switch it off and check the maker's manual.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
AQUASTRONG 1 HP Above Ground Pool Pump
A 1 HP pump with a built-in 24-hour timer, a large filter basket and a transparent lid, moving up to 4,945 GPH.
View on Amazon -
LINGXIAO Pool Pump Inground 1HP 6340GPH Single
A 1 HP pump with a 6,340 GPH flow rate, an extra-large filter basket, a clear lid and two drain plugs.
View on Amazon -
Hayward Super Pump InGround Pool Pump
A 1 HP pump with an extra-large debris basket, swing-away hand knobs and 4-bolt access to internal parts.
View on Amazon -
Flynsu Fits Hayward W3SP1580 PowerFlo LX 1 HP
A 1 HP replacement pump with a see-through strainer cover, an oversized debris basket and a 12-month warranty.
View on Amazon
These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.
FAQ
How often should I empty the pump basket?
Empty it when you see leaves and debris in the basket, or when the water flow drops. Check it more often when leaves fall or after a storm, and follow the schedule in the maker's manual.
Why is my pool pump losing flow?
A full basket, a lid that does not sit flat, or a sand filter that needs backwashing can all slow the flow. Empty the basket, check the lid, and backwash the filter following the filter manual.
Can I run the pump on a timer?
Yes, if your pump has a timer. The AQUASTRONG pump has a built-in 24-hour programmable timer with nine selectable operating hours from 2 to 24 hours. Set the running time and let it run each day at the set time.





