How-to · Pool Pumps
How to Use a Pool Pump
To use a pool pump, fill the pump basket with water, close the lid, open the valves, and switch the pump on so water circulates through the filter. Set the run time on the timer or switch, then check the basket through the clear lid and empty it when debris collects. Keep the water level high enough to cover the skimmer opening while the pump runs.
Prime the pump before first use
Fill the pump with water before you switch it on for the first time. The LINGXIAO pump asks you to fill it with water before first use, to keep the motor from overheating. Open the strainer lid, pour water into the basket housing until it is full, then close the lid firmly. Open the valves on the suction and return lines so water can move through the pump and filter. The LINGXIAO pump has two drain plugs on the bottom, so check they are closed before you start the pump.
Set the run time
Decide how long the pump runs each day and set it on the timer or the switch. Set the timer where your pump has one. The AQUASTRONG pump has a built-in 24-hour programmable timer with nine selectable running times from 2 to 24 hours, so pick a time and it repeats at the same time each day. Run the pump while the pool is in use and while debris is falling into the water.
Check and empty the filter basket
Look through the clear lid to see when the basket needs cleaning. The AQUASTRONG pump has a transparent lid and a large filter basket that collects debris, leaves and grit, while the Hayward Super Pump has an extra-large debris basket with added leaf-holding capacity. Switch the pump off, open the strainer cover, lift the basket out and tip the debris into a trash can. The Hayward pump has swing-away hand knobs that open the strainer cover without tools, and the Flynsu pump has a see-through strainer cover with a swing-away hand knob.
Match the pump to your pool and power
Check the voltage and the fittings before you plug the pump in. The LINGXIAO pump runs at 115V or 208-230V, with a voltage button on the motor that switches between the two, while the AQUASTRONG pump and the Flynsu pump run at 115V. The AQUASTRONG pump has 1.25 inch and 1.5 inch inlet and outlet adapters, and the LINGXIAO pump comes with 2 inch and 1.5 inch unions. Follow the maker's installation manual, and hire a licensed electrician where the manual says so.
Know when to call for help
If the pump hums without moving water, loses prime, or leaks at a fitting, switch it off and check the basket, lid and drain plugs first. Do not open the motor or the pump housing to fix parts inside; contact the maker or a repair service for motor, wiring or internal repairs. Keep the manual nearby so you can follow its schedule for cleaning and care.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
AQUASTRONG 1 HP Above Ground Pool Pump
Its built-in 24-hour timer offers nine running times from 2 to 24 hours, and the 1 HP motor moves up to 4,945 GPH through a large filter basket.
View on Amazon -
LINGXIAO Pool Pump Inground 1HP 6340GPH Single
Its 1 HP motor moves up to 6,340 GPH at 115V or 208-230V, and the extra-large filter basket has a clear lid with two drain plugs below.
View on Amazon -
Hayward Super Pump InGround Pool Pump
Its extra-large debris basket holds more leaves, and swing-away hand knobs open the strainer cover without tools for cleaning.
View on Amazon -
Flynsu Fits Hayward W3SP1580 PowerFlo LX 1 HP
Its 1 HP motor moves 60 GPM at 115V, and the see-through strainer cover and oversized debris basket open with a swing-away hand knob.
View on Amazon
These come from our ranked list Best 1 Hp Pool Pump, which compares them spec by spec.
FAQ
How long should I run my pool pump each day?
Use the timer to set a daily run time, and watch the water and the basket to judge whether the time suits your pool. The AQUASTRONG pump offers nine running times from 2 to 24 hours on its built-in timer, so pick a time and let it repeat each day.
Why does my pool pump lose prime?
A pump that runs dry or pulls air through a loose lid or an open drain plug can lose prime. Fill the pump with water before first use, close the lid firmly, and check the drain plugs before you switch it on.
What voltage does a pool pump need?
It depends on the pump. The AQUASTRONG pump and the Flynsu pump run at 115V, while the LINGXIAO pump runs at 115V or 208-230V, with a voltage button on the motor. Follow the maker's installation manual for the outlet and wiring.





