How-to · Tankless Water Heaters
Hot Water Heater Types Explained
Hot water heaters come as tank and tankless types, and the tankless type heats water only when a tap opens, so the supply does not run out the way a tank can. The 4 heaters here are all gas tankless models, in condensing and non-condensing designs, for natural gas, propane or either fuel. Pick the type by fuel, flow rate and where the unit will sit.
Tankless vs tank
A tankless heater warms water as it flows through the unit, only when a tap opens, so there is no stored volume to run out. A tank heater holds a set volume, such as a 50-gallon tank, and reheats it as it cools. All 4 heaters here are tankless gas models, so they heat on demand instead of holding a stored volume.
Condensing or non-condensing
A condensing heater recovers heat from its exhaust gas, which shows up as a higher UEF figure. The Rinnai is condensing with UEF .98, while the Rheem and the Westinghouse are non-condensing, and the Rheem lists 0.82 UEF. UEF measures how much of the fuel energy becomes hot water, so a higher UEF means less energy lost up the vent.
Gas type and flow rate
Gas type decides which fuel the heater burns: the Rheem and the MIZUDO run on natural gas, the Westinghouse runs on propane, and the Rinnai runs on either fuel through its Smart Sense gas control. Flow rate, in GPM, decides how many fixtures run at once: the Rheem delivers 7.0 GPM, the Westinghouse 7.9 GPM, the Rinnai 10 GPM and the MIZUDO 10.3 GPM. A low-flow start matters for small draws: the MIZUDO starts at 0.53 GPM.
Controls and installation
Temperature control holds the water within ±1°F on the Rheem, the MIZUDO and the Westinghouse. The MIZUDO and Westinghouse add WiFi and app control, with voice control on the Westinghouse. The Rheem and the MIZUDO are indoor models, and the Rinnai installs indoors or outdoors. The Rinnai and MIZUDO both recommend professional installation, so follow the maker's manual and hire a licensed plumber where the manual says so.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Rheem RTG Series 7.0 GPM Natural Gas
Its natural gas tankless design delivers 7.0 GPM at a 35°F rise with 160,000 BTU, a digital LED control with ±1°F steps, and LeakGuard leak detection.
View on Amazon -
MIZUDO Natural Gas Tankless Water Heater
Its natural gas tankless design delivers 10.3 GPM with 199,000 BTU, WiFi and app control, and a 0.53 GPM low-flow start.
View on Amazon -
Rinnai RX180iN Condensing Smart Sense Tankless Water
Its condensing design delivers 10 GPM at 180k BTU on natural gas or propane, for indoor or outdoor installation.
View on Amazon -
Westinghouse Tankless Water Heater Propane Indoor
Its propane tankless design delivers 7.9 GPM at 180,000 BTU with app and voice control for 3 to 5 fixtures.
View on Amazon
These come from our ranked list Best Tankless Water Heater, which compares them spec by spec.
FAQ
What is the difference between condensing and non-condensing?
A condensing heater recovers more heat from exhaust gas, so its UEF runs higher: the Rinnai lists UEF .98, while the non-condensing Rheem lists 0.82 UEF. Both heat water on demand, and the condensing design keeps more heat in the water.
How much hot water flow do I need?
Match the GPM figure to the fixtures that run at once. The Rheem delivers 7.0 GPM for 2 to 3 showers, the Westinghouse delivers 7.9 GPM for 3 to 5 fixtures, and the MIZUDO delivers 10.3 GPM for 5 to 7 outlets.
Can a tankless heater run on propane?
Yes. The Westinghouse runs on propane, and the Rinnai runs on natural gas or propane through its Smart Sense gas control. The Rheem and MIZUDO run on natural gas.





