How-to · Tankless Water Heaters
How Well Does a Tankless Water Heater Work
A tankless water heater works by heating water as it flows through the unit, only when a tap is open, so there is no tank of stored hot water to empty. How well it works for a home depends on its flow rate: the heater supplies hot water while the flow stays within the maker's GPM figure.
How a tankless heater heats water
When a tap opens, water flows through the heater and a gas burner heats it as it passes through, so hot water is made only while the tap is open. When the tap closes, heating stops. That is why the heater is called on demand, and why the flow rate matters more than a tank size.
What the flow rate figure means
The flow rate, in GPM, is the amount of hot water the heater can supply at once. The Rheem supplies 7.0 GPM, the Westinghouse 7.9 GPM, the Rinnai 10 GPM, and the MIZUDO 10.3 GPM. Count the fixtures you use at the same time, such as showers, faucets, laundry and dishwashers, and compare that use with the maker's GPM figure and the number of fixtures it covers.
What temperature control does
Temperature control sets the temperature of the water leaving the heater. The Rheem, MIZUDO and Westinghouse models control temperature within plus or minus 1 degree F. The MIZUDO has a default setting of 107 degrees F and an adjustable range up to 149 degrees F, with a low-flow activation of 0.53 GPM.
Installation and upkeep
Follow the maker's installation manual, and hire a licensed electrician or plumber where the manual says so. The Rinnai has a Quick Flush feature for flushing, and the MIZUDO and Westinghouse have freeze protection. For flushing, draining and other upkeep, follow the schedule and steps in the maker's manual, and contact the maker or a repair service for work inside the unit.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
Rheem RTG Series 7.0 GPM Natural Gas
A 7.0 GPM natural gas heater at 160,000 BTU with a digital LED temperature control panel and a 0.82 UEF.
View on Amazon -
MIZUDO Natural Gas Tankless Water Heater
A 10.3 GPM natural gas heater at 199,000 BTU with WiFi and app control and a 0.53 GPM low-flow activation.
View on Amazon -
Rinnai RX180iN Condensing Smart Sense Tankless Water
A 10 GPM condensing heater for natural gas or propane, with indoor or outdoor installation and a Quick Flush feature.
View on Amazon -
Westinghouse Tankless Water Heater Propane Indoor
A 7.9 GPM propane heater at 180,000 BTU with app and voice control and plus or minus 1 degree F temperature stability.
View on Amazon
These come from our ranked list Best Tankless Water Heater, which compares them spec by spec.
FAQ
Can a tankless heater run several showers at once?
It depends on the flow rate. The Rheem runs 7.0 GPM for 2 to 3 simultaneous showers, the MIZUDO 10.3 GPM for 2 to 3 bathrooms, the Rinnai 10 GPM for 6 fixtures at once, and the Westinghouse 7.9 GPM for 3 to 5 fixtures.
Does a tankless heater keep water at one temperature?
The Rheem, MIZUDO and Westinghouse models control temperature within plus or minus 1 degree F. The MIZUDO has a default setting of 107 degrees F and an adjustable range up to 149 degrees F, so check the control on your model.
What does GPM mean on a tankless heater?
GPM means gallons per minute, the flow of hot water the heater can supply at once. A higher GPM figure means more fixtures can draw hot water at the same time, so compare the maker's GPM figure with the fixtures you use together.




