Amazon Black Friday Week deals

Paid link

How-to · Tankless Water Heaters

How a Tankless Water Heater Works

Short answer

A tankless water heater heats water only when a tap opens, with no tank to keep hot. Cold water runs through a heat exchanger, the burner fires, and hot water flows to the tap until you close it. The models below heat 7.0 to 10.3 GPM, so the flow rate decides how many showers and taps run at once.

  1. Open a tap to start it

    Nothing heats until water moves. Open a hot tap and cold water flows into the heater, and the burner fires to heat it as it passes through. The MIZUDO starts at 0.53 GPM, so a low-flow faucet still calls for heat. Close the tap and the burner stops, so the heater uses gas only while water runs.

  2. The heat exchanger warms the water

    Cold water runs through a heat exchanger while the burner adds heat, so the water leaves hot without a tank. The Westinghouse uses a copper heat exchanger with a variable-speed combustion fan, and the Rinnai carries a 15-year warranty on its heat exchanger. The Rheem delivers 160,000 BTU per hour, and the MIZUDO delivers 199,000 BTU of heating input.

  3. Flow rate sets how much runs at once

    Flow rate, in GPM, sets how many taps and showers run at once. The Rheem runs 7.0 GPM for 2-3 simultaneous showers, the Westinghouse runs 7.9 GPM for 3-5 fixtures, and the Rinnai runs 10 GPM for 6 fixtures at once. The MIZUDO runs 10.3 GPM for 5-7 outlets across 2-3 bathrooms. Add up the fixtures you run together and match the total to the GPM figure.

  4. Temperature stays steady

    A tankless heater adjusts the burner as the flow changes, so the temperature stays steady. The Rheem, MIZUDO and Westinghouse each hold the water within ±1°F. The MIZUDO runs a default 107°F setting with an adjustable range up to 149°F. The Rheem has a digital LED panel for its temperature control.

  5. Venting and installation

    Gas models vent exhaust outside, so follow the maker's installation manual and hire a licensed plumber where the manual says so. The Rheem uses a direct vent system, the MIZUDO uses a sealed concentric direct-vent system with a 3-inch by 5-inch vent kit, and the Rinnai uses its Versa Vent. The MIZUDO and Rinnai both call for professional installation.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Tankless Water Heater, which compares them spec by spec.

FAQ

Does a tankless heater run out of hot water?

No. It heats water as it flows, so hot water keeps coming while the tap stays open. Each model here gives endless hot water on demand.

How many showers can a tankless heater run?

It depends on the flow rate. The Rheem runs 7.0 GPM for 2-3 showers, the Westinghouse runs 7.9 GPM for 3-5 fixtures, and the Rinnai runs 10 GPM for 6 fixtures at once.

Do I need a plumber to install a tankless heater?

Yes. The MIZUDO and Rinnai both call for professional installation, and gas and venting work belongs to a licensed plumber. Follow the maker's installation manual for the model you buy.

More tankless water heaters how-tos