Amazon Black Friday Week deals

Paid link

How-to · Tankless Water Heaters

How a Tankless Water Heater Works

Short answer

A tankless water heater heats water only when a tap opens. Cold water flows through a heat exchanger while a gas burner fires, and the burner adjusts its output to hold the set temperature, so hot water keeps flowing as long as the tap stays open. When the tap closes, the burner shuts off.

  1. Water flows in and the burner fires

    When you open a hot tap, cold water enters the heater. The heater fires its burner and heats the water as it passes through the heat exchanger. The MIZUDO starts at a 0.53 GPM flow, so even a low-flow tap can call for hot water.

  2. The burner adjusts to hold temperature

    The burner does not run at one fixed output. It modulates gas and water flow to hold the temperature you set, and the Rheem, MIZUDO, and Westinghouse models hold it within ±1°F. The MIZUDO ships with a 107°F daily setting and adjusts up to 149°F, while the Rinnai runs on natural gas or propane.

  3. Flow rate sets how many taps run at once

    Flow rate, in gallons per minute, sets how much hot water the heater can supply at once. The Rheem supplies 7.0 GPM, the Westinghouse 7.9 GPM, the Rinnai 10 GPM, and the MIZUDO 10.3 GPM. The Rheem gives 7.0 GPM at a 35°F temperature rise, so a colder inlet or more open taps lower the flow each tap gets.

  4. Venting and power

    The Rheem uses a direct vent system, and the MIZUDO draws outdoor air for combustion through a sealed concentric vent. The MIZUDO and Westinghouse run on a standard 120V power supply. Follow the maker's installation manual, and hire a licensed plumber or electrician where the manual says so.

  5. What happens when the tap closes

    When the tap closes, flow stops and the burner shuts off, so the heater stops heating water. It heats water only when needed, which the MIZUDO and Westinghouse describe as reduced standby heat loss against tank heaters. The Rheem, MIZUDO, and Westinghouse include freeze protection for cold weather.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Tankless Water Heater, which compares them spec by spec.

FAQ

What limits how much hot water a tankless heater gives?

The flow rate in gallons per minute sets the limit. The Rheem supplies 7.0 GPM, the Westinghouse 7.9 GPM, the Rinnai 10 GPM, and the MIZUDO 10.3 GPM, so compare the figure with the taps you run together.

Do I need a plumber to install a tankless water heater?

Follow the maker's installation manual. Professional installation is recommended for the MIZUDO and Rinnai models, and hire a licensed plumber or electrician where the manual says so.

Can I set the water temperature on a tankless heater?

Yes. The Rheem, MIZUDO, and Westinghouse models adjust temperature within ±1°F, and the MIZUDO has a default 107°F setting that adjusts up to 149°F.

What is the heat exchanger in a tankless heater?

It is the part the burner heats as water passes through it on the way to the tap. The MIZUDO covers its heat exchanger for 5 years, and the Rinnai covers its heat exchanger for 15 years.

More tankless water heaters how-tos