Amazon Black Friday Week deals

Paid link

How-to · Tankless Water Heaters

How an On-Demand Water Heater Works

Short answer

When you open a hot tap, cold water flows through a heat exchanger, a gas burner heats it as it passes, and hot water reaches the tap. It heats water only while the tap runs, so it does not keep a tank hot all day.

  1. No tank, heat on demand

    A tank heater keeps a full tank hot around the clock. An on-demand heater holds no stored hot water. When you open a hot tap, cold water runs through a heat exchanger inside the unit, and a gas burner heats the water as it passes through. Hot water leaves the unit and runs to the tap, and the heater stops heating when you close the tap.

  2. Opening a tap starts the heat

    The heater waits until water moves. The MIZUDO starts heating at 0.53 GPM, so a low-flow tap can still call for hot water. Once water flows, the burner fires and the heat exchanger warms the water on its way to the tap. Close the tap and the flow stops, and the burner shuts off with it.

  3. How it holds the temperature

    The burner changes its output as the flow changes, so the water leaves at the set temperature. The Rheem, the MIZUDO and the Westinghouse each hold the water within ±1°F of the set point. The MIZUDO offers a default 107°F setting with a range up to 149°F. Set the temperature on the control panel, and check the maker's manual for the settings on your model.

  4. Gas, venting and power

    These heaters burn gas, so each one needs a gas supply. The Rheem and the MIZUDO run on natural gas, the Westinghouse runs on propane, and the Rinnai runs on natural gas or propane. The Rheem uses a direct vent system, the MIZUDO uses a sealed concentric direct-vent system, and the Rinnai uses its Versa Vent for indoor or outdoor installation. The MIZUDO and the Westinghouse run on a standard 120V power supply. Follow the maker's installation manual, and hire a licensed plumber where the manual says so.

  5. What limits the hot water

    The flow rate sets how much hot water the heater can give at once. The Rheem is rated 7.0 GPM, the Westinghouse 7.9 GPM, the Rinnai 10 GPM and the MIZUDO 10.3 GPM. The Rheem covers 2 to 3 simultaneous showers, the Westinghouse covers 3 to 5 fixtures, the Rinnai covers 6 fixtures and the MIZUDO covers 2 to 3 bathrooms. Count the fixtures you run at once, then match the count to the maker's flow rate.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Tankless Water Heater, which compares them spec by spec.

FAQ

Does an on-demand heater keep water hot all day?

No. It heats water only when a tap opens, so it does not keep a tank hot all day. When you close the tap, the burner stops heating.

What flow rate do I need for two showers at once?

Match the maker's flow rate to the fixtures you run at once. The Rheem is rated 7.0 GPM for 2 to 3 simultaneous showers, and the MIZUDO is rated 10.3 GPM for 2 to 3 bathrooms.

Can an on-demand heater run on propane?

Yes. The Westinghouse runs on propane, and the Rinnai runs on natural gas or propane. The Rheem and the MIZUDO run on natural gas.

Do I need a plumber to install one?

Follow the maker's installation manual for your model. The MIZUDO and the Rinnai both say professional installation is recommended, so hire a licensed plumber where the manual says so.

More tankless water heaters how-tos