How-to · Well Pumps
How a Deep Well Jet Pump Works
A deep well jet pump sits above the well and pushes water down to a jet in the well, and the jet lifts water back up to the pump. The pump uses one pipe for shallow wells and two pipes with an ejector kit for deep wells. The CrestWave and Acquaer pumps here are jet pumps, while the VEVOR and Hallmark pumps are submersible pumps.
Where the pump sits
A deep well jet pump sits above the well, not in it. The motor, the pump body and the pressure switch sit at the surface, and pipes run down into the well. A submersible pump is different: the VEVOR and Hallmark pumps sit in the well itself. The VEVOR pump has a 33 ft electric cord running up to the surface, and its motor sits in the water it pumps.
How the jet lifts water
The pump sends water down one pipe to the jet, or ejector, in the well. The jet narrows the flow, and the fast water pulls well water in with it. The mixed water then travels back up the second pipe to the pump and on to the house. The CrestWave pump comes with an ejector kit and venturi parts, and the Acquaer pump comes with venturis and an ejector kit for its two-pipe setup.
One pipe or two pipes
A shallow well uses one pipe, and a deep well uses two. The CrestWave pump works for shallow wells from 0 to 26 ft with one pipe and deep wells up to 90 ft with the ejector kit. The Acquaer pump works for single pipe wells from 0 to 25 ft and two pipe wells from 26 to 90 ft. Match the pipe setup to the depth of the well, and follow the maker's installation manual.
Pressure, flow and shutoff
The pump builds pressure and stops at a set point. The Acquaer pump starts when the pressure falls below 20 PSI and shuts off above 40 PSI. The CrestWave pump has a maximum pressure of 60 PSI and a maximum flow of 2,330 GPH at 26 ft and 824 GPH at 90 ft. Both jet pumps have overheat protection that stops the motor when it runs hot.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
VEVOR Deep Well Submersible Pump 1 HP
A 1 HP submersible pump with a 37 GPM flow, a 207 ft head, a 4 inch stainless steel frame and a 33 ft cord.
View on Amazon -
CrestWave 1 HP Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump with an ejector kit, a 2,330 GPH flow at 26 ft and a 145 ft lift.
View on Amazon -
Acquaer Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump with a 115V/230V dual voltage motor, an ejector kit and a 20 to 40 PSI pressure switch.
View on Amazon -
Hallmark Industries MA0414X-7 Deep Well Submersible Pump
A 1 HP submersible pump with a 33 GPM flow, a 3.8 inch outside diameter and a 1-year warranty.
View on Amazon
These come from our ranked list Best Well Pump, which compares them spec by spec.
FAQ
What is the difference between a jet pump and a submersible pump?
A jet pump sits above the well and uses a jet in the well to lift water, while a submersible pump sits in the well and pushes water up. The CrestWave and Acquaer pumps here are jet pumps, and the VEVOR and Hallmark pumps are submersible pumps.
How deep can a deep well jet pump reach?
It depends on the pump and the ejector setup. The CrestWave pump reaches up to 90 ft with its ejector kit, and the Acquaer pump works for two pipe wells from 26 to 90 ft.
Does a jet pump need an ejector kit?
For deep wells it does. The CrestWave pump comes with an ejector kit and venturi parts, and the Acquaer pump comes with venturis and an ejector kit for its two-pipe setup.




