Amazon Black Friday Week deals

Paid link

How-to · Well Pumps

How Shallow Well Pumps Work

Short answer

A shallow well jet pump sits above ground and draws water up through a single pipe from the well, using an ejector to lift the water. The pump pushes that water to the house or garden. The two jet pumps here work for shallow wells to 25 or 26 feet, and with an ejector kit to 90 feet.

  1. What a shallow well jet pump does

    A shallow well jet pump sits above ground and draws water up from the well through a single pipe. Its motor drives the pump, and the ejector and venturi in the kit create the suction that lifts the water. The CrestWave jet pump works for shallow wells from 0 to 26 feet with a single pipe, and the Acquaer jet pump works for single pipe wells from 0 to 25 feet. Once the water reaches the pump, the pump pushes it on to the house, garden or sprinkler system.

  2. How the ejector reaches deeper wells

    Both jet pumps here are convertible, so the same pump can work in a shallow well or a deeper well with the ejector kit. The CrestWave pump works for deep wells to 90 feet with the ejector kit, and the Acquaer pump works for two pipe wells from 26 to 90 feet. The CrestWave pump delivers up to 2330 GPH at 26 feet and 824 GPH at 90 feet, so flow falls as the well depth rises. Fit the ejector kit as the maker's manual shows, and follow the manual for installation.

  3. What a submersible pump does instead

    The VEVOR and Hallmark pumps are submersible pumps, so they sit in the water in the well and push water up to the surface. The VEVOR pump has 6-stage thermoplastic impellers, a copper motor, a 33 foot electric cord and a built-in check valve to prevent back-flow, with 37 GPM flow and 207 feet of head. The Hallmark pump has a 1-1/4 inch NPT discharge and 33 GPM flow. Do not use the VEVOR pump without water or at a low water level.

  4. Pressure, protection and upkeep

    The Acquaer pump has an automatic pressure switch that starts to pump when pressure is lower than 20 PSI and shuts off when pressure goes over 40 PSI. The VEVOR pump has overheat protection that stops the motor when it is stuck or in abnormal situations, and the maker warns against running it without water. The CrestWave and Acquaer pumps state protection that shuts the pump off when it runs dry. The VEVOR pump also has a built-in check valve to prevent back-flow and a stainless steel filtration mesh to filter impurities. Follow the maker's installation manual, and hire a licensed electrician or plumber where the manual says so.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Well Pump, which compares them spec by spec.

FAQ

How deep can a shallow well pump reach?

The CrestWave jet pump works for shallow wells to 26 feet with a single pipe, and the Acquaer jet pump works for shallow wells to 25 feet with a single pipe. With an ejector kit, both work for wells to 90 feet.

What is the difference between a jet pump and a submersible pump?

A jet pump sits above ground and draws water up through a pipe, while a submersible pump sits in the well and pushes water up. The VEVOR and Hallmark pumps here are submersible pumps, and the CrestWave and Acquaer pumps are jet pumps.

What does the pressure switch do?

The Acquaer pump starts to pump when pressure falls below 20 PSI and shuts off when pressure goes over 40 PSI. That keeps water available in the house.

More well pumps how-tos