How-to · Well Pumps
How Water Well Pumps Work
A water well pump moves water from the well to the house. A submersible pump sits in the well and pushes water up, while a jet pump sits above ground and pulls water up through a pipe. Which type fits depends on how deep the well is.
The submersible pump pushes water up
A submersible pump drops into the well and pushes water up to the house. The VEVOR pump is a 1 HP submersible with 37 GPM max flow and 207 ft max head, and it fits a 4-inch or bigger well casing with a 33 ft electric cord. The Hallmark pump is a 1 HP submersible with 33 GPM max flow. The motor sits underwater with the pump, and the pump pushes the water up through the discharge pipe instead of pulling it.
The jet pump pulls water up
A jet pump sits above ground and pulls water up through a pipe, using a venturi and an ejector kit to lift it. The CrestWave pump is a 1 HP convertible jet pump for shallow wells from 0 to 26 ft on a single pipe and deep wells up to 90 ft with the ejector kit, moving up to 2330 GPH at 26 ft and 824 GPH at 90 ft. The Acquaer pump is a 1 HP convertible jet pump for single pipe wells from 0 to 25 ft and two pipe wells from 26 to 90 ft.
What flow and head mean
Flow is how much water the pump moves, and head is how high it lifts it. The VEVOR pump lists 37 GPM max flow and 207 ft max head, and the Hallmark pump lists 33 GPM max flow. The CrestWave pump shows the trade-off: it moves 2330 GPH at 26 ft but 824 GPH at 90 ft, so read the flow figure at the depth of your well.
Pressure switches and protection
The Acquaer pump has an automatic pressure switch that starts pumping when the pressure falls below 20 PSI and shuts off above 40 PSI, so the house has water at all times. The Acquaer pump shuts off when the water inside it runs out. The VEVOR and CrestWave listings state built-in overheat protection: the VEVOR stops the motor when stuck or abnormal, and the CrestWave system guards against damage from dry-running or voltage changes. The VEVOR pump has a built-in check valve to stop back-flow and a stainless steel mesh filter for impurities. Follow the maker's installation manual, and hire a licensed electrician or plumber where the manual says so.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
VEVOR Deep Well Submersible Pump 1 HP
A 1 HP submersible pump with 37 GPM max flow and 207 ft max head, a 33 ft cord and a built-in check valve.
View on Amazon -
CrestWave 1 HP Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump for wells to 26 ft on one pipe and 90 ft with the ejector kit, moving up to 2330 GPH.
View on Amazon -
Acquaer Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump with a 115V/230V dual voltage motor and an automatic pressure switch.
View on Amazon -
Hallmark Industries MA0414X-7 Deep Well Submersible Pump
A 1 HP submersible pump with 33 GPM max flow, a stainless steel body and a 1-year warranty.
View on Amazon
These come from our ranked list Best Well Pump, which compares them spec by spec.
FAQ
How deep can a submersible well pump lift water?
The VEVOR submersible pump lists 207 ft max head. Read the head figure for the pump you are considering and compare it with the depth of your well.
What is the difference between a submersible pump and a jet pump?
A submersible pump sits in the well and pushes water up, while a jet pump sits above ground and pulls water up through a pipe. The VEVOR and Hallmark pumps are submersible, and the CrestWave and Acquaer pumps are jet pumps.
How does the pressure switch on a well pump work?
The Acquaer pump has an automatic pressure switch that starts pumping below 20 PSI and stops above 40 PSI. Follow the maker's installation manual, and hire a licensed electrician or plumber where the manual says so.



