Amazon Black Friday Week deals

Paid link

How-to · Well Pumps

How Deep Can a Hand Well Pump Reach

Short answer

How deep a well pump works depends on the pump type. A surface jet pump on a single pipe reaches 25 to 26 ft, while the same kind of pump with an ejector kit reaches 90 ft. A submersible pump sits down in the well, and the VEVOR model here is rated at 207 ft of head. Measure your well depth, then match it to the pump's stated depth.

  1. What limits how deep a pump works

    A pump at the surface pulls water up through the pipe, and that pull only reaches so far down. The jet pumps listed here state 25 ft for the Acquaer and 26 ft for the CrestWave on a single pipe. A submersible pump sits down in the water and pushes the water up instead, so it reaches deeper. The VEVOR submersible is rated at 207 ft of head, which is the height it can lift water. Check the pump's stated depth before you buy, since each type has its own limit.

  2. How a deep-well jet pump reaches 90 ft

    A convertible jet pump can switch from a single pipe to two pipes with an ejector kit. The CrestWave and the Acquaer both state well depths up to 90 ft with the ejector kit, and the Acquaer states two-pipe wells from 26 to 90 ft. The ejector sits down in the well and helps push the water up to the pump at the surface. Flow drops as the well gets deeper: the CrestWave gives 2,330 GPH at 26 ft and 824 GPH at 90 ft, so read the flow at your well depth, not just the top figure.

  3. How to match a pump to your well

    Start with your well depth and the water level in the well, then compare it with the pump's stated depth. For a well deeper than 26 ft, a convertible jet pump with an ejector kit or a submersible pump fits: the CrestWave and the Acquaer reach 90 ft, and the VEVOR submersible is rated at 207 ft of head. Check the flow at your depth, since the CrestWave gives 2,330 GPH at 26 ft and 824 GPH at 90 ft. Follow the maker's manual for installation, and hire a licensed plumber or electrician where the manual says so.

  4. What head and flow mean

    Head is the height a pump can lift water, and flow is how much water it moves. The VEVOR is rated at 207 ft of head and 37 GPM of flow, and the CrestWave gives 145 ft of lift and 2,330 GPH of flow. A pump gives less flow as the lift grows, so compare the flow at the depth of your well. The Hallmark gives 33 GPM of flow, and the Acquaer pressure switch starts the pump below 20 PSI and stops it above 40 PSI.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Well Pump, which compares them spec by spec.

FAQ

How deep can a hand pump reach?

The pumps listed here are electric jet and submersible pumps with 115V motors, not hand pumps, so their stated depths do not answer how deep a hand pump reaches. Measure your well depth first, then look for a hand pump rated for that depth.

Do I need a deep well pump for a 90 ft well?

Yes, if your well is that deep. A single-pipe jet pump only reaches 25 to 26 ft, so pick a convertible jet pump with an ejector kit, like the CrestWave or the Acquaer, or a submersible pump like the VEVOR. Check the flow at 90 ft before you buy.

What size well casing fits a submersible pump?

The VEVOR fits a 4-inch or bigger well casing, and the Hallmark has a 3.8-inch outside diameter. Measure your casing first, then check the pump's diameter against it. Follow the maker's manual for installation.

More well pumps how-tos