Amazon Black Friday Week deals

Paid link

How-to · Well Pumps

How a Manual Well Pump Works

Short answer

A manual well pump works by moving a piston up and down inside a cylinder. The handle drives a rod that lifts the piston, the lift draws water up from the well, and a check valve holds the water so it does not fall back. Each stroke pushes a fresh charge of water out of the spout.

  1. The handle, rod and piston

    A manual well pump has a handle on top, a long rod down the pipe, and a piston at the bottom of the rod. Pushing the handle down and pulling it up moves the rod, and the rod moves the piston up and down inside a cylinder. The piston carries a seal that fits the cylinder wall, so water cannot slip past it on the way up. The handle, rod and piston are the parts that turn arm power into lift.

  2. How suction lifts the water

    When the piston rises, it leaves a low-pressure space below it, and the weight of the air above the well pushes water up the pipe to fill that space. A check valve below the piston stops the water from falling back when the piston drops again. The valve holds each charge in place while the piston drops for the next stroke. Each stroke lifts a fresh charge of water, and the spout lets it out at the top.

  3. How the electric pumps differ

    The pumps shown here run on power, not on a handle. The VEVOR is a submersible pump that sits in the well and pushes water up, with 37 GPM flow and 207 ft head on a 1 HP motor. The CrestWave and the Acquaer are jet pumps that sit above the well and use an ejector kit, for wells up to 90 ft deep. The Hallmark is a submersible pump with 33 GPM flow on a 1 HP motor.

  4. What to check when water stops

    A pump that has lost its prime needs water poured in before it can draw again, and a loose fitting can let air in. The CrestWave and the Acquaer have overheat protection that stops the motor when the pump runs dry, so let the pump cool and follow the manual before you run it again.

What you need

As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.

These come from our ranked list Best Well Pump, which compares them spec by spec.

FAQ

Does a manual well pump need power?

No. The handle and your arm move the piston, so no outlet or motor is needed. The electric pumps shown here plug in instead: the VEVOR and CrestWave run on 115V, and the Acquaer runs on 115V or 230V.

Why does my pump lose its prime?

A pump loses its prime when air gets in and water falls back down the pipe. Check the fittings and the check valve as the manual says, and prime the pump again before use.

How deep can a manual well pump lift water?

It depends on the pump and the well, so check the manual for the depth rating. The electric pumps shown here state their own lift figures, such as the VEVOR at 207 ft head.

More well pumps how-tos