How-to · Well Pumps
How a Two-Pipe Jet Pump Works
A two-pipe jet pump lifts water from a deep well with a pump above ground and an ejector kit down the well. Two pipes link them: the pump drives water down to the ejector, and the venturi in the ejector draws well water up the second pipe. The Acquaer and CrestWave pumps here work as two-pipe pumps for wells from 26 to 90 feet deep.
The parts of a two-pipe setup
A two-pipe setup has a jet pump above ground, an ejector kit down the well, and two pipes between them. The Acquaer pump is built for single pipe wells from 0 to 25 feet or two pipe wells from 26 to 90 feet, including venturis and an ejector kit. The CrestWave pump works for shallow wells from 0 to 26 feet with a single pipe and deep wells up to 90 feet with its ejector kit.
How the ejector lifts the water
The pump sends water down one pipe to the ejector, and the venturi in the ejector pulls well water into the second pipe and up to the pump. That is how a jet pump reaches water below the reach of a single pipe, which the Acquaer lists for wells from 0 to 25 feet. The CrestWave lists up to 2330 GPH at 26 feet and 824 GPH at 90 feet, so flow falls as the well gets deeper.
Pressure switch and shutoff
The Acquaer pump has an automatic pressure switch that starts pumping when pressure falls below 20 PSI and shuts off when it goes over 40 PSI. The CrestWave pump lists up to 145 feet of vertical lift and 60 PSI max pressure. Both the CrestWave and the Acquaer pumps have overheat protection that shuts the motor off when it runs hot, and the VEVOR pump has built-in overheat protection too.
Jet pump or submersible
A jet pump sits above the well, while a submersible pump sits in the well itself. The VEVOR submersible pump is a 1 HP pump with 37 GPM max flow and 207 feet of max head, with a 33 foot electric cord and a stainless steel frame. The Hallmark submersible pump is a 1 HP pump with 33 GPM max flow and a 1-year warranty. Follow the maker's manual for installation, and hire a licensed plumber or electrician where the manual says so.
What you need
As an Amazon Associate I earn from qualifying purchases. Product details come from each Amazon listing; we do not test products in person.
-
VEVOR Deep Well Submersible Pump 1 HP
A 1 HP submersible pump with 37 GPM max flow and 207 feet of max head, a 33 foot cord and a stainless steel frame.
View on Amazon -
CrestWave 1 HP Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump for shallow wells to 26 feet and deep wells to 90 feet, with an ejector kit and up to 2330 GPH.
View on Amazon -
Acquaer Shallow/Deep Well Jet Pump
A 1 HP convertible jet pump for single pipe wells to 25 feet and two pipe wells to 90 feet, with an automatic pressure switch.
View on Amazon -
Hallmark Industries MA0414X-7 Deep Well Submersible Pump
A 1 HP submersible pump with 33 GPM max flow, a stainless steel body and a 1-year warranty.
View on Amazon
These come from our ranked list Best Well Pump, which compares them spec by spec.
FAQ
What is the difference between a one-pipe and a two-pipe jet pump?
A one-pipe jet pump serves shallow wells: the Acquaer lists single pipe wells from 0 to 25 feet and the CrestWave from 0 to 26 feet. A two-pipe jet pump adds an ejector kit down the well and serves deep wells to 90 feet on both pumps.
How deep can a two-pipe jet pump lift water?
The Acquaer and CrestWave pumps here list deep wells up to 90 feet with the ejector kit. The CrestWave lists up to 2330 GPH at 26 feet and 824 GPH at 90 feet, so flow is lower from deeper wells.
Do I need a plumber to install a jet pump?
Follow the maker's manual for installation. Hire a licensed plumber or electrician where the manual says so, and never run the pump without water, to avoid idle running.




